I have read other threads (Which are older) but could not find an answer if there is already a thread with the help I am looking for please let me know. I want to use a smart switch to switch between high/low on the pump, and a timer, and be able to use turn the pump off all using my iPhone. I have a Pentair 340079 two-speed pump. 115 v that is wired directly to a 40 amp breaker. Any parts and wiring diagrams will be great!
2-speed smart switch/timer
- Thread starter credemann
- Start date
-
- Tags
- pump smart switch switch
- May 3, 2014
- 62,674
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I am not familiar with 2 speed motors, but let's see if this bump helps you get some responses.
I was able to figure this out with some help with a coworker Jeff who drew the schematics and told me about the relay that I could use. I’m going to try and include pictures of how this was set up as well as links to the parts I used. Basically I got two smart switches one for off on the other for Hilow wire them to a relay and that solved my problem I put the items in to two gang electrical boxes. And this is what I found worked for my pump switching it from a manual toggle High/Low switch to a smart switch.
Eaton smart switch
Eaton smart switch