2 questions, Leveling & wall clamps

Dcookster

0
Silver Supporter
Apr 23, 2017
89
Stafford Va
I’m just about completely level 2 to 3 feet around the out perimeter, above ground pool, how important is it to get the inside completely level? Question #2 - what does one use to hold the walls in place during install in case of a windy day or 2, I’m thinking it will take a couple days to get wall up, liner installed and pool filled. Will large binder clips work as long as I pad them, then some cord and staked in ground? Looking for cheap. Thanks for any advice. Finally no rain this weekend and I’m off all next week. It’s time :p
 
If you don't get the whole thing level, inside and out, you will have problems down the road. Now you can "dish" the inside to make the middle a little deeper and such as that but on the most part it should be level and smooth.

You are on the right track with holding the walls up over night.

Good luck and share pics of your build!
 
3B71463E-8808-4A2C-A0E4-F288E43DDB51.jpgF5575D48-894C-48EF-B279-16CF013A184F.jpg91E31C42-3FEF-450D-B1DE-873201AF8171.jpgB613A6C8-2633-4878-935B-02769F5F8644.jpg2FD21A11-14FC-4FF7-B822-18E7E49FCF9B.jpgIt’s getting there, 2 1/2 yards of sand delivered yesterday that looks a lot more then needed? Three 3 inches right? Just 5 more pavers to cut in on one of the curves. Then I need to install metal plates on buttresses, move sand to middle and hopefully I can get some help tomorrow for wall and liner.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.