1st timer looking for tips and tricks

[PoolStored]

Whisper flow is ok. IC30 is too small. You got what you got, work with it. Run the pump 24x7. Run the pump down until the cell turns off. Add 200 rpm and run that 24x7. Figure out the % output to get the 3.5* 1.25.

Read the article on the signature I linked. That is your profile.

 

[CoolArrow]

Whisper flow is ok. IC30 is too small. You got what you got, work with it. Run the pump 24x7. Run the pump down until the cell turns off. Add 200 rpm and run that 24x7. Figure out the % output to get the 3.5* 1.25.

Read the article on the signature I linked. That is your profile.

Figures...oh well I guess I run this one til the wheels fall off then upgrade when the time comes. The output looks to be 75% at 24 hours of run time according to the app.

Any benefit of upping the RPMs at anytime during the 24 hours? The pump has 3 different settings I can configure for this if it's beneficial.

 

[PoolStored]

Any benefit of upping the RPMs at anytime during the 24 hours? The pump has 3 different settings I can configure for this if it's beneficial.

Run the pump for a reason, filtering, adding chemicals, skimming, heating etc. RPMs variation is dependent on need. I run 1300rpm 24x7 when I don't need the heater. I keep the pool covered with solar cover, so skimming isn't a thing for me. When I want to heat, I run 2200rpm at night to heat and 1300 during the day.

If running SWCG off flow + 200 skims fine, you don't need to heat, great, run SWCG + 200. Determine your schedule based on needs. If you don't have a cover and SWCG + 200 skims fine, then run that. If you don't have a cover and it doesn't skim enough, up the rpm during the day, or morning, or whatever to skim.

Make sense?