CSI between -0.3 and 0 is fine. The targets it is giving you should be in the Target column. And it will tell you what to add to get to each target. But, those numbers are ok.
1st full test in a while.
- Thread starter az240z
- Start date
New test results:
CL 5
PH 7.2
CC 0
CH 350
TA 50
CYA 40
Happy, Happy Happy with these results... Temp is 104.
I added chlorine and acid last nite.
CL 5
PH 7.2
CC 0
CH 350
TA 50
CYA 40
Happy, Happy Happy with these results... Temp is 104.
I added chlorine and acid last nite.
As you add acid to bring down the pH that will also lower your TA
FYI - with all the sunny days & your water temp is probably close to what I am at 90, I use about 3.5 PPM of chlorine
I add approx 35oz of chlorine every night. Ph a little less. I'm hoping the ph will start holding for a few days..