I have an Aqua Logic SWG that is not working. It is not even 2 1/2 years old (installed Aug 2007). I may have a few issues. First off, I noticed that my pool temperature reading is not accurate and has been slowly increasing and is now reading 200 F. Just recently, I noticed that I have a few errors alerting me to check my system. It reads "Chlorinator Off - No Cell Power" and "Check System - No Cell Power 2". My cell temperature reads 52 degrees.
I'm wondering if the pool temp and the no cell power problems are related or completely seperate and also wondering if the pool temp is read from the SWG cell or from a separate temperature sensor. Local pool stores have told me conflicting things.
I've read other posts and have cleaned my SWG, "rebooted" my system and nothing has worked. HELP!!!
I'm wondering if the pool temp and the no cell power problems are related or completely seperate and also wondering if the pool temp is read from the SWG cell or from a separate temperature sensor. Local pool stores have told me conflicting things.
I've read other posts and have cleaned my SWG, "rebooted" my system and nothing has worked. HELP!!!