Hey all. I've had this pool for a year and it just started leaking for some reason. Looking for guidance on how to stop this leak
Skimmer leak
- Thread starter richierich
- Start date
Where is the water leaking exactly? Are there screws that could be snugged up?
Admittedly, I have no experience with AG skimmers.
Admittedly, I have no experience with AG skimmers.
All the screws are tight. In the pic you can see a little bead of water toward the right middle of the skimmer to the wall
Edit. I got in the pool and tightened a couple screws a quarter turn. For the last minute it hasn't been dripping
Edit. I got in the pool and tightened a couple screws a quarter turn. For the last minute it hasn't been dripping
Well, if it is not cracked, then it must be the gasket. Suppose you could lower the water level and pull it apart and reinstall it.
IMHO if it is that slight I would suggest you leave it alone. It is really not hurting anything. If you over tighten the screws you run the risk of cracking the skimmer screw holes and then you have a much bigger problem. Mine has a very small trickle that has basically zero effect on the water level.
