As the title says, the ScreenLogic computer readout for my IC60 SWG is showing 0 on the salt level while the IC60 is showing a steady green light for both good salt levels and a good cell. When tested, I am showing 3200 ppm as actual. Water temp is 71deg. New pool build last fall which has had good readings until the last few days.
Today, I unplugged and took the IC60 off and looked at the plates and sensor. I didn't see any scaling on either but did a cleaning anyways.
I haven't been able to tell if the unit is producing chlorine as there hasn't been much chlorine loss even with the sunny, warmer days of late as I bumped up my CYA level to 80 last week. This has obviously caused me to readjust my expected chlorine depletion per day.
Any ideas or anyone have this experience before?
Thanks for the help.
Today, I unplugged and took the IC60 off and looked at the plates and sensor. I didn't see any scaling on either but did a cleaning anyways.
I haven't been able to tell if the unit is producing chlorine as there hasn't been much chlorine loss even with the sunny, warmer days of late as I bumped up my CYA level to 80 last week. This has obviously caused me to readjust my expected chlorine depletion per day.
Any ideas or anyone have this experience before?
Thanks for the help.