We purchased a Jacuzzie pool pump from Leslie pools in Oct 2017. Since then my bill had increased by $250 a month. Found out my husband is setting it on high because the inflow is almost nil unless on high. I have contacted Leslies to come out and check the pump. They did install it. I was not aware it was so new and may not be the best pump.
problem with pump
- Thread starter Rosebud
- Start date
- May 3, 2014
- 58,620
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Once Leslie's comes out come back here and let us know the issues. If you have any questions, post them up here.
We could use more information if you wish us to help you. A signature really helps - see Pool School - Read This BEFORE You Post
Take care.
Once Leslie's comes out come back here and let us know the issues. If you have any questions, post them up here.
We could use more information if you wish us to help you. A signature really helps - see Pool School - Read This BEFORE You Post
Take care.
rb,
Welcome to TFP... A great place to find the answers all your "Why can't my husband do anything right?" questions...
If you can, tell us if your new pump is a two speed or VS pump.. If a VS pump, what speed is it set to run on "high"?
If you can, please post the P/N of your new pump...
What HP was the original pump? Was it a single speed pump?
Thanks for posting,
Jim R.
Welcome to TFP... A great place to find the answers all your "Why can't my husband do anything right?" questions...
If you can, tell us if your new pump is a two speed or VS pump.. If a VS pump, what speed is it set to run on "high"?
If you can, please post the P/N of your new pump...
What HP was the original pump? Was it a single speed pump?
Thanks for posting,
Jim R.
Similar threads
