Will there be enough preasure for 3 seperate 2" return lines, with a 23', 52' and 69' run from equipment.
My Pool/Spa combo share all of the equipment except for seperate pump for the spa jets. I am using 20' pipe and 90 degree sweep elbos everywhere so there won't be any corners; for minimizing head loss. Also the pump is about 12-24 inches above the pool water line.
Suction Side:
Main Drain closed due to leakage so I will use the skimmer and a hayward navigator which will be a 20' run of 2 1/2" PVC for both spa and skimmer.
Equipment:
Flotec 1.5 HP pump with SF 1
Pentair D.E. Filter FNSP 48
Pentair Master Temp 400 heater
Goldline Aqua Collection Turbo Cell T-15 Automatic Chlorinator and Flow Switch.
All of which will be controlled by Goldline Prologic PS-8 and wireless remote.
Return Side:
After the Jandy 3-way Valve splitting pool and spa return I will have three seperate 2" return lines all running through Jandy 2-way Valves. The return lines are 23', 52' and 69' run from equipment.
I figured that especially because the main drain isn't working all three return lines woulf help with circulation.
Or should I only run 2 retun lines, one in the deep end of 23' and one in the shallow end which will be a 69' run.
Thanks for the help in advance.
My Pool/Spa combo share all of the equipment except for seperate pump for the spa jets. I am using 20' pipe and 90 degree sweep elbos everywhere so there won't be any corners; for minimizing head loss. Also the pump is about 12-24 inches above the pool water line.
Suction Side:
Main Drain closed due to leakage so I will use the skimmer and a hayward navigator which will be a 20' run of 2 1/2" PVC for both spa and skimmer.
Equipment:
Flotec 1.5 HP pump with SF 1
Pentair D.E. Filter FNSP 48
Pentair Master Temp 400 heater
Goldline Aqua Collection Turbo Cell T-15 Automatic Chlorinator and Flow Switch.
All of which will be controlled by Goldline Prologic PS-8 and wireless remote.
Return Side:
After the Jandy 3-way Valve splitting pool and spa return I will have three seperate 2" return lines all running through Jandy 2-way Valves. The return lines are 23', 52' and 69' run from equipment.
I figured that especially because the main drain isn't working all three return lines woulf help with circulation.
Or should I only run 2 retun lines, one in the deep end of 23' and one in the shallow end which will be a 69' run.
Thanks for the help in advance.