Re: e90 error code on my intex purespa

[sherrylp123]

Re: e90 error code on my intex purespa

Ok after research i guessed that there was a reset button on the impeller motor. I was wrong. While cleaning and dumping the spa i knocked the pump system over, this jar knocked the impeller out of its bearing gasket which prevented it from working. The motor is on the bottom of the system with easy access. 3 screws for the motor and guard and 5 to open the impeller chamber. The power connection is also an easy disconnect. It is working fine now. Try this fix first....

I am have the same problem e90 code but have no clogs ] can anyine help me the box your talking about is on very bottom encased in epoxy ?

 

[Patrick_B]

Re: e90 error code on my intex purespa

Hi Sherry, and welcome to TFP!

Hoping a bump ,ignt get your post seen by others who have had this error. Enjoy your time on TFP!

 

[Bandit5]

Re: e90 error code on my intex purespa

I looked up that code and it seems to indicate that you may have an airlock. WHen I get them in my spa, I unscrew a relief valve on the impeller to let the air out and it clears up in a few seconds. I do not know what your impeller looks like, but if you can find a way to let air out then you can probably solve the problem.