- Jul 18, 2013
- 525
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
Intermatic Pool Timer - Where is the model number?
- Thread starter JodieM
- Start date
- Jul 18, 2013
- 525
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
If it helps, the double pole breaker has 2 30 amp breakers. The single pole is for the patio lighting.
- Feb 6, 2015
- 6,104
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
It looks to be a T104M.
What's wrong with it?
Is there a label on the inside of the timer panel door with a model number on it?
What's wrong with it?
Is there a label on the inside of the timer panel door with a model number on it?
- Jul 18, 2013
- 525
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
The timer doesn't work anymore, the inside gears aren't turning.
I looked everywhere for a label and found nothing. I ended up ordering a T104M.
I looked everywhere for a label and found nothing. I ended up ordering a T104M.
- Feb 6, 2015
- 6,104
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Sometimes it's just the timer motor. Those are replaceable too. But since you already ordered a complete timer, you should be all set.
Just be sure to wire it exactly as your present one - I believe it's set up to only allow your booster pump (on the timer on the left) to come on if the pool pump (timer you are replacing) is on.
Let us know how it works out.
Just be sure to wire it exactly as your present one - I believe it's set up to only allow your booster pump (on the timer on the left) to come on if the pool pump (timer you are replacing) is on.
Let us know how it works out.
Similar threads
