Caribbean pools up in Passaic country is where I got mine. Might be closed tho tooanyone from New Jersey could recommend a shop in Flemington, Branchburg area that still open and carry M500? there is a shop in flemington but they said close for the season.
thanks
I would say that filter will clog much faster with 2-5 micron. just like the RO/DI water filter. the more fine particles to filter the faster the filter clog and reduce the flow rate.As per my understanding, M500 extra fine filters rated to around 50 microns.
Can we use 2-5 microns filters on that ?
I mean If i replace filter materiel by myself and installed, it may impact cleaner performance? I compared 5 & 50 microns and water circulation is not looks like different.
Any advise?
Have a great weekend
View attachment 71782
Thoughts on how these will clean fiberglass and specifically the safety ledge? I’m assuming the far end would be easy as it’s smooth top to bottom. How about the ridges on the sides? Trying to decide between M400/M500 or possibly S series. Thanks
I have an in ground cleaner but we get a bunch of leaves and fine grit and I hate vacuuming. Hubby says buy a robot and so it seems like the M5/500 is what I am leaning towards. We have an infinity edge pool and a spa. Do I just take the robot out and put him in the spa and then into the overflow basin to clean both those areas even though they are relatively small?
You can certainly try. The robot may get a little confused initially with such a small area to work with and may not be able to clean it effectively with no room to maneuver but it's worth a shot.
I hate to spend $$ on a robot if I am just going to have to lug out the vacuum anyway
Research question. How will the M series handle my beach entrance? Will it sense that it's getting out of water and back off or will it get stuck? Thanks.
Hi folks:
I just bought an M500 "without Bluetooth." I guess the store I bought it from had it both with and without. I assume "without" is perhaps the previous year model? The part ID is Maytronics Part # 99991089-US versus the Bluetooth version which is Maytronics Part # 99991089-USBLE.
The "non Bluetooth" version was $300 cheaper. I opted for this one since my wife isn't a big smarthphone user and I think she would prefer the traditional remote control versus the iPhone app.
Looking forward to trying out this beast in May when my gunite pool opens!