Putting my first pool up and was wondering how big the cove should be right now it's 6" high and slopes out to 16" total from wall is that too much? I am putting a unibead liner on Thanks in advance
Might want to put down some sand in there. On the above ground pool I put up years ago I used the pre-fab material coping which worked out well. I also used a pre-fab mat for the bottom of the pool which I also would recommend.
On a 27' pool you are fine. I might not have extend that far in because it may make standing by the edge with my margarita difficult. But what you have is ok
You might want to consider the steps you will be putting in the pool, if any, and how they will fit on or around the cove. Some steps are "notched" or rounded in the back where they will sit above the cove but others might be flat. You can change the cove shape where any steps might be placed.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!