Hello Everyone thanks for stopping by.So I have a couple of questions regarding how to set up my VS pump and how to run a suction cleaner.I have a Pentair VS Pump, which since I've had a pool runs at a single speed of 2150rpm. Why that is I don't know, that's just how the guy set it up after our pool was completed.It seems to me silly to have a VS pump and only run it at a single speed. So my question for you veterans out there, how should I set it up. Break it up into different schedules with different speeds?Now, if I am changing speeds on the pump, my other question is, what about the automatic suction cleaner? After trial and error, i come to realize that the only way it will operate is if the only suction point is the side suction. I have to shut all other suction points and run the pump at about 2200rpm's. Is that normal for a pool cleaner. If that's the case does that mean that the pool cleaner doesn't run all the time. I mean, it can't because otherwise I would never use my Main drain or skimmer.I guess what I am trying to ask, badly, is how do I set up my system to run. Speeds and times for my VS pump, and what suctions to use. And should the cleaner only run when needed, i.e. a couple of times a week as needed, but not all the time???Someone please point me in the right direction.Thanks.Details on my pool.Salt Water pool, 12x24' w/spa. Approx 15k gal.Pentair EasyTouch 8 Automation controlIntellichlor IC40 SCGIntelliFlo VS PumpZodiak MX8 cleaner