That would mean a bit further from the pump it would seem. I suppose I could put it in-line part way up. You have said to put the VRV 6 feet above the pump in another thread. From where are you measuring this? Typically hydraulic measurements are taken at the top if the water surface, IIR. This would indicate measuring from the top of the pipe or outlet fitting. Is this correct or is it that critical?
These panels will be on the roof of a cover I am proposing to build over the equipment enclosure so it still would be about 6 to 15 feet of piping to the VRV from the pump depending in how I plumb it. BTW, can the piping go vertical straight up to the equipment on the roof? This would be right about 6 feet above the pump so the VRV would be just beyond the roof jack.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!