I wrote a VERY long winded post yesterday only to have it lost to the interwebs after clicking submit, so I'll keep this one short. Here are the highlights:
So back to the forum topic... Assuming I can fend her off and get the pool clear (again), how can I get the FC levels back to normal so the kids can swim? Based on a CYA of 70, I'm at 28ppm FC right now. Is it acceptable to use a chlorine neutralizer after the SLAM is complete?
Thanks in advance.
- on my second SLAM in 4 weeks
- FC was at 13ppm when I started the last SLAM (didn't dial back the SWG and left the pool cover on) - still working through why my pool seems to breed stuff at high FC levels
- last SLAM ended 3 weeks ago, (water was crystal clear, 0CC, no overnight FC loss) but it took an additional two weeks for FC to get below 10ppm - I assume this was because my CYA is 70??
- current SLAM started last night, 2PPM lost overnight - again, still working through why my pool seems to breed stuff in the presence of normal FC levels. Will paste my FC levels below in case anyone has any ideas.
- wife is upset because kids can't swim - wants to hire pool guy
So back to the forum topic... Assuming I can fend her off and get the pool clear (again), how can I get the FC levels back to normal so the kids can swim? Based on a CYA of 70, I'm at 28ppm FC right now. Is it acceptable to use a chlorine neutralizer after the SLAM is complete?
Thanks in advance.
Last edited: