To the best of my knowledge there’s no reason the App won’t work on the new iPhone. I’ve contacted the developer for a clearer answer and will respond if he says different.
More likely was an error somewhere along the way during the transfer from your old device to your new one. It’s likely somewhere there was a glitch in iCloud causing the App to have an error. Can you try to delete the App and reinstall from the App Store?
Let us know if that works. If it doesn’t please email me at [email protected].
I would not trust your pH sensor with FC levels that high. Chlorine is a known poison to pH probes and a cheap pH meter will almost surely be affected by high FC levels.
As for CSI calculations, pH values above 8.5 are unrealistic in pools. No pool should be allowed to get that high in pH. Once you go above a pH if 8.5, carbonate ion (CO3^2-) dominates and bicarbonate ion (HCO3^1-) concentrations crash. The CSI calculations in PoolMath assume that bicarbonate is the main buffer and ignores carbonate. Since the CSI cakciukation involves the logarithm of a ratio of calcium ion concentration to bicarbonate ion concentration, driving the bicarbonate value towards zero will cause nonsensical results.
Stil no solution for decimal value outside USA. Entering 7,7 or 7.7 still gets 77. Not able to use app (let alone paying for it)
I know you are all busy but PLEASE SOLVE THIS!
Would also be nice if I would be able to paste username and password to login.