replacing some polaris 180 pieces

[jberrymd]

I am replacing some worn or missing pieces of my polaris 180. It is 10 years old and works well, just wearing in spots. One thing I am replacing are a couple missing screws that have backs out and been lost. I fount some on amazon that were about 9.50 a piece. Then I found these that appear to be the same...https://www.amazon.com/Machine-Screws-Phillips-Stainless-Quantity/dp/B01CPSZ2DY/ref=sr_1_3?ie=UTF8&qid=1491075460&sr=8-3&keywords=10-32+x+7%2F8in+Stainless+Steel+Pan+head.

Will these work? 50 for $10 is way better deal.

Thanks

 

[mfk0213]

Hi Jberrymd,

You'll need to verify the threads are the same. It might be easier for you to take the screws you're trying to replace and go to a big box story and compare threads. They often have in the screw and nut aisle gauges for you to use to see which thread and size you have.

Good luck!

-Mo

 

[YippeeSkippy]

If you can find the schematic for the Polaris180 online that should list the size for the screw.

Yippee