I have a 16,500 gallon SWG pool.
Using the TF-100, I ran the tests and got:
FC: 5
pH: 7.8
CH: 300
TA: 200
CYA: 85
Today, I threw in a little over 2 pounds of dry acid, and the pH lowered to 7.2, but the TA is still around 150 or 160.
Is there something else I should be doing to get my TA down? Or can I just wait until the pH goes up a bit, then lower it to keep bringing down alkalinity over time?
Using the TF-100, I ran the tests and got:
FC: 5
pH: 7.8
CH: 300
TA: 200
CYA: 85
Today, I threw in a little over 2 pounds of dry acid, and the pH lowered to 7.2, but the TA is still around 150 or 160.
Is there something else I should be doing to get my TA down? Or can I just wait until the pH goes up a bit, then lower it to keep bringing down alkalinity over time?