I opened my pool this weekend and thanks to you guys the water was clear. After cleaning the water I turned on my gas heater (a used Pentair Minimax CH 150) and it fired right up. I let it run for several hours then using the on/off switch I turned it off and walked away. I came back later and the heater was still on so I turned the temp dial all the way down. It stayed on, I turned the pump off and the heater shut down right away. Once the pump came back on so did the heater. I had to shut the gas off to turn it off.
Is there any way I can just install a new toggle on/off switch? If so can one of you please guide me through it or at least help me test it. I did move the water in/outlets to the opposite side and was careful about rewiring but maybe I made a mistake somewhere. I tried to look at the wiring diagram but that is way above my head.
Heres a link to the manual: http://www.pentairpool.com/products/pro ... php?id=104
Thanks for any and all help
John
Is there any way I can just install a new toggle on/off switch? If so can one of you please guide me through it or at least help me test it. I did move the water in/outlets to the opposite side and was careful about rewiring but maybe I made a mistake somewhere. I tried to look at the wiring diagram but that is way above my head.
Heres a link to the manual: http://www.pentairpool.com/products/pro ... php?id=104
Thanks for any and all help
John