I'm opening my pool and I would hope someone could help me with the best sequence to do it in. My measurements from the TF-100 kit are:
FC=CC=TC==> Assuming zero since very green and no chlorine added for several months
pH > 8.2
TA = 40
CH = 330
CYA < 20
Temp = 75
I'm not sure about CYA but I could still see the black dot after filling it all the way. My values on CYA have always been much less than when I could get the reading from the pool store so I'm not sure how accurate my reading is compared to theirs.
I look forward to your help. Thanks and love the site.
FC=CC=TC==> Assuming zero since very green and no chlorine added for several months
pH > 8.2
TA = 40
CH = 330
CYA < 20
Temp = 75
I'm not sure about CYA but I could still see the black dot after filling it all the way. My values on CYA have always been much less than when I could get the reading from the pool store so I'm not sure how accurate my reading is compared to theirs.
I look forward to your help. Thanks and love the site.