So my liner ended up coming out of the track and got a lot of water behind it. I removed all the water and had a big wrinkle on the 1st step. Since there isnt a lot of water above it it was easy to move. I ended up working the wrinkle out but now there is an excessive amount of liner above the water so it does not stay in the track.
I then moved all the excess back down so the water kept the liner in place but of course there is a wrinkle now.
My question is when you flatten out a wrinkle where exact do you put the liner (assuming the liner stretching because of the wrinkle)? Am i just screwed ? Roght now i have the excess at the bottom of 1st step/ top of second step where it is hardly noticeable to the eye but can easily be felt
the water table rose so much from the rain i got another wrinkle (6 feet long) in middle of shallow end. Was going to try the plumber method but need to know where to "work" the excess liner to exactly
I then moved all the excess back down so the water kept the liner in place but of course there is a wrinkle now.
My question is when you flatten out a wrinkle where exact do you put the liner (assuming the liner stretching because of the wrinkle)? Am i just screwed ? Roght now i have the excess at the bottom of 1st step/ top of second step where it is hardly noticeable to the eye but can easily be felt
the water table rose so much from the rain i got another wrinkle (6 feet long) in middle of shallow end. Was going to try the plumber method but need to know where to "work" the excess liner to exactly