So we put liner in and started putting water in when we noticed one of the side support rails in the middle is higher than the others how do we fix this with out starting over
Two years ago the liner shifted when we started filling our Intex. One leg was leaning badly, so we looped a tow strap around the tee and used an engine hoist to lift the post so we could reposition it.
Maybe if you could lift this post you could insert a paver underneath it to make things level.
That post definitely needs a paver or 2 under it. I'd say drain some water, pull the liner back and remove the cove and slide a couple pieces of wood in to hold the load (pool wall) and lift it enough so you can slide the pavers in under the post. These pools are heavy though. You will need some strong men to do this.
I wonder if you could use a jack and a length of 2x4 or landscaping timber to lift it. You'd have to make a decent base to keep the jack from getting buried.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!