- Mar 3, 2013
- 37
Equipment was all replaced about 6 seasons ago or so. This year i'm having some problems.
First - The pool ran for a day or so without skimmer baskets in.
I noticed when turning on pump a bunch of gunk that got thru is going down into the pump basket when i start the pump. However when I turn off the pump that gunk gets sucked back into the plumbing so I can't grab it. Also water is just pouring out of the pump when I remove the lid. I've never seen this happen before. Typically I open up the filter air valve and i hear the air and water running back into the pool.
Any ideas why the water is pouring out like this and also how I can capture the gunk inside the plumbing ?
Thanks
- - - Updated - - -
Oh to add - I also noticed that it seems like my Quad DE filter lid didn't seat onto the bottom like it normally does when I put everything together. I clamped down just fine but it had a gap that I don't remember seeing before. Also i'm not registering any pressure on my gauge. I'm assuming the gauge just is not working any longer but not sure if this has to do with the seating of the lid.
First - The pool ran for a day or so without skimmer baskets in.
I noticed when turning on pump a bunch of gunk that got thru is going down into the pump basket when i start the pump. However when I turn off the pump that gunk gets sucked back into the plumbing so I can't grab it. Also water is just pouring out of the pump when I remove the lid. I've never seen this happen before. Typically I open up the filter air valve and i hear the air and water running back into the pool.
Any ideas why the water is pouring out like this and also how I can capture the gunk inside the plumbing ?
Thanks
- - - Updated - - -
Oh to add - I also noticed that it seems like my Quad DE filter lid didn't seat onto the bottom like it normally does when I put everything together. I clamped down just fine but it had a gap that I don't remember seeing before. Also i'm not registering any pressure on my gauge. I'm assuming the gauge just is not working any longer but not sure if this has to do with the seating of the lid.