swg output

  1. P

    Use of SWG or Chlorine Feeder With Temperatures Below 60 Degrees

    I live in South Carolina and keep the pool open all year. I have only been Using the SWG and we’re beginning to have temperatures below 60°. Should I now begin using the chlorine feeder, liquid chlorine or do something else until spring.
  2. K

    Should the BioGuard tests be trusted?

    Hi everyone, I have a brand new SWG pool, 13,500 gallons. First week, pool company tossed 3 bags of salt in. 1st Water Test: At home, SWG measured salinity at 3100ppm BioGuard test - recommended adding 101 lbs of salt (salinity 2500), 2.75 lbs of pH Adjustment, 5.5lbs of Stabilizer 100, 10.75...
  3. treyrich

    Help me dial in my SWG -- How much UV does an auto cover block?

    Alright, here's some background, after going through the SLAM process a couple of times before it "took" (clearly I missed something the first time despite passing the OCLT) I think that I've got the pool free of anything actively consuming my FC (evidenced by my passing the OCLT last night with...
  4. G

    Salt level reading dropping overnight

    Hello, Assistance needed if possible…I have a Hayward salt generator, T-15 cell. Everything works great except for one draw back. When my pump shuts down for the night, my average salt levels drop below allowable generating levels. In the morning with the levels low, my generator indicates low...
  5. D

    Basic SWG Question (I think)

    Hi All, Is there a relationship between a pump's flow rate and an SWG production rate? I feel like this is a very straight-forward mechanical question, but I can not find a definitive answer. Without knowing the science behind electrolysis, it seems to me that chlorine production (oz/hr) would...
  6. P

    Tiny white flakes in Pool

    Hi All, I've been hovering around in the forums for a little while now and this is my first post ;) I'm hoping someone can help with a small problem I'm having. I've had a new salt pool for about 4 months now and ever since we added the salt I've had tiny little white flakes in the pool and spa...
  7. B

    Obtaining & maintaining adequate FC w Intex ECO 5110, please help

    Hello. Searching for wisdom. 1000g above ground pool. Intex ECO 5110 SWG generator. Previously posted w issues having earlier this season w error codes. SWG 1 yr old and only 2 months of use last summer. In summary— got 91 repeatedly, so slowly added tons of salt, tested salt and it had...
  8. johig

    SWG Output for Attached Spa

    I have an attached (raised) spa with a spillover to the main pool. All equipment is shared between the pool and spa, with a single variable speed pump. When the pool was completed and set up, the SWG was set to run at 25% with the pump in "pool" mode but only 1% with the pump in "spa" mode. - Is...