salt chlorinator

This is my first pool; I have a rectangle pool, about 18,000 gallons, including the spa. From what I can tell, it's an older system, and the heater is disconnected from the plumbing. 18,000 Gallons, Pool (32' x 14', depth 6' & 4'), Spa (8' x 5', depth 3') is where I came up with the Gallons. I...

Hi everyone, Thanks for the forum and advice so far. I have been reading through a lot (information overload) and have bought the Clear Choice Labs salt water testing kit. Have done a couple of tests and compared with the results from a store test, some differences but not too badly out...

Hello, I've recently gotten my pool from a total swamp state to clean water and I've been having an issue with my salt cell. At first it would warn of low amps (26V 2.8A). So I decided to clean the cell using water and muriatic acid according to instructions in the manual. I don't believe there...

Hi, I saw older threads but not sure there is a clear answer to my issue. I am receiving intermittent errors that the K1 and K2 relay are stuck open and the T-Cell current sensor is short. Error message goes away after a while, but returns. I changed the 4Amp fuse which did not get the permanent...

Hey all, Just spent 3 days in a salt water pool resort. Normally I get eczema after a few hours in my pool. Takes a week to resolve. My skin is great after 3 solid days in multiple pools at this salt water resort. I’m curious if I can install a salt water cell for our pool. How does...

Leslie's Sold me a Swimpure Extreme 40. Unfortunately for me, I didn't do my homework and didn't know the system was designed for pools "Up to 40,000 gallons". The problem is my pool is barely 8,000 gallons, and I am having trouble keeping the chlorine levels down. It started with a setting...

I’ve been a pool owner for years and at one point looked into converting my pool to saltwater. I wasn’t able to justify it at the time purely on an economical basis since the math did not work out when considering the payback period. I recognize that it’s a completely legitimate reason to...

My Pentair Superflo had a short in the feed that damaged the main board in my Jandy salt cell. Rewired pump and replaced board and everything works fine except whenever the pump is running the salt cell is not getting 60 Mhz and will not generate.

I just got a new salt cell and when I went to use it. the system started generating then the check salt and inspect cell lights come on and it won’t let me change the cell type it just stops at the Circuit board revision screen. I’m thinking it being the wrong cell is the problem why it’s not...

With the price (and availability) of chlorine becoming an issue, I want to convert my system to a salt water chlorinator. The problem is, I can't find a way to fit one into my plumbing setup without bringing at least one underground run above ground. As you can see from the picture of my pad...

Just wondering on this. Last year I had issues with my salt generator making way too much chlorine. At first my CYA levels were high so I ended up draining the pool 3/4s and refilling. If I let my salt generator go on its own within a few days the chlorine level would be around 8PPM. So I would...

Using two separate testing methods including a Taylor K2006C, my FC has been around 8 ppm for over a week, in a salt water pool, despite turning off the chlorinator. According to Dr. Google: "Sunlight depletes chlorine level, although not as fast as chemical methods. On a cloudless sunny day...

We are getting quotes for a new inground pool. Its area is 475 sq feet. Shallow section at 4ft, and deep at 6ft. What’s the best way to treat the water if family members have exzema?

Hi All, I have purchased a property with a multi pools system. It has a main pool, a water feature pool, a baby wading pool & a raised spa that waterfalls in to the wading pool. It is fitted with the infloor Caretaker 8 port Ultraflex system (runs off main pump system) & the Leaf be gone system...