rs-485

My Intellipro VS pump about 2 weeks ago suddenly stopped communicating with my Easytouch panel. My pump was replaced a little over 3 and 1/2 years ago and I have never had a problem until now. I have had the EasyTouch 4 remote which also stopped working. The pump works manually in the service...

In summary, I'm trying to find someone that has successfully received data via RS-485 using an Aqua Trol, not Aqua-Rite which I've found multiple posts. To give you more detail, I'm trying to pull whatever data is available from my Hayward Aqua Trol via the RS-485 connection and am wondering if...

Recently had a “ Fault - High Flue” error on my Jandy JXI , bought a new Flue sensor and installed it. Error wouldn’t clear so i cleared it out by holding pool, menu, spa button for 7 seconds, go to load defaults , finished , error cleared. Manually verify heater starts up no errors and runs for...

TFP family. I have a Jandy 1.65hp VSP and also have the JEP-P Controller for the pump. Per the installation. Indicates I need a RS-485 wire to connect the controller to the Pump. I do not have that wire. Been looking online and seem like there is a ton of wires ranging from 2 to 9 pins that are...

It's 2021 and everything in my backyard I can control from my phone except the Pool Pilot DIG-220. My Jandy panel has later software which no longer works with 3rd party SWGs (thanks Jandy). Chlorinator Translator doesn't work with the Pool Pilot either. What other options exist besides...