intellitouch i10+3d

I have and Intellitouch i10+3d that will no longer turn on the spa. From what I can tell the relay is not getting trigger signal for some reason. I am presuming the board is bad but wondered if there could be something else.

Due to a fault in an existing Intellitouch i10 +3, I am looking for a relay that is the same as the supplied Intellitouch OMRON G7L-2A-BUBJ-CB-IN but with a normally closed rather than open output circuit. All else should be the same - e.g. footprint and voltages etc. as it will fit in the same...

I have added the automated bypass to my master temp and intellitouch controlled Pentair system. While everything works well when heat is called for: ie the bypass valve activates and starts allowing water to flow to the heater before the heater starts, when the temp is reached or the...

Hi - I’ve been a pool owner for about 5 years and have learned a lot along the way. At the moment, I’m struggling with my intellitouch i10+3D load center does not power on. I have been able to verify that the power coming from my main panel is live but not sure what to meter to test after the...