circupool

Has anyone figured out how to lengthen the cable going from RJ45+ controller to Cell? Has anyone figured out the type of connector used by this cable?

So, I finally decided it was time to convert my pool with a SWG. I purchased the Edge 40 from Circupool. My issue is how to best install it. I have 14” of straight pipe going down in the return, but it’s very short coming out of the filter output. I’m considering installing the cell on the 14”...

I have been screwing around with tech support for a number of weeks and spent way too much time on the phone. After 15 minutes on hold I am done. So apparently nobody is there? And that is on any option presented by the robo answer machine. If there is anyone who has contact information beyond...

I recently bought and installed a brand new cirupool t15 salt cell this weekend, it replaced a hayward turbo t15 cell, the control module is an aquarite goldline model # is AQR15 I have a 27k gallon vinyl inground pool with a cartridge filtration system. The control module is about 8 years old...

I'm starting a new thread on this topic so as to get up-to-date information from @circupool or others on the overpressure warning label that is attached to (some?) CircuPool SWG cells. I've just ordered an RJ-60 Plus that will be installed on an existing pool that has a Polaris 360...

Hi there, I have experience with maintaining a simple chlorine pool with a single speed pump, single cartridge filter and cholorine tablet dispenser for a pool that's screened in. So low maintenance. Now we have a salt water pool, with pentair variable speed pump, pentair controler panel...

I am considering wiring my CircuPool RJ 60 to my Jandy VS pump to come on when the pump comes on. Per the Jandy manual, it looks like I could use one of the two auxiliary relays. Does this wiring schematic seem doable? The most difficult thing would be adding the GFCI breaker to my pool pad...

I am converting our pool to an SWG. After much time on this forum and its recommendations and reviews, I have narrowed it down to CircuPool. I have a 17-18k gallon pool south facing in the Central Florida sun/heat. My choices are between the CircuPool RJ-45 PLUS and the RJ-60 PLUS. Is the RJ-60...

Hi, I decided to switch to the Salt Chlorine Generator system, based on my search here I realized CircuPool is very famous especially the RJ model because of the warranty and easy installation( I plan to install it myself) Right now the EDGE-40 is $1199 which is $300 cheaper than RJ45, Is there...

Hi everyone, I've decided on getting a CircuPool RJ-60 PLUS Salt Chlorine Generator after much research on this site and other places. However, before I buy, do you think 60k SWG is overkill for a 26k pool? Should I consider the 40k SWG? I have a single speed pump, not variable speed, so I'm...

I just purchased a Circupool RJ-60+ system for my southern Illinois inground pool (description in my sig) to try and get ahead of the chlorine shortage this summer. I have 0 experience with salt water pools, but have done a lot of reading about them. I'm still not 100% convinced that the salt...

Hello TFP! Long story short I was planning on installing the Circupool RJ60+, but the Hayward AquaRite W3AQR15 went on sale for ~$900 so I decided to buy the Hayward. Now I'm looking for the help/suggestions/tips on installing it. Questions: 1. Right now I have an old intermatic timer that is...

I know this has probably been asked before but I'm looking for some more personal advice. I have a Hayward S-200 Vari-Flo pump currently set up with an in-line puck/stick chlorine feeder. I obviously have to replace the chlorine feeder and I am thinking of going ahead and converting to SW. I was...

I recently installed an RJ45+ it was running initially and I could see the haze like it was generating chlorine. However it was showing my instant Salt reading was only around 2600 and my average is still showing at 2500. The water was cold and around 57 so I thought it could have been something...

Hi, I am new to TFP and was hoping I could get some help making sure I make the right choice in selecting a SWG. I am one that over researches to a point of being back to square 1 with way too much information. That said I am look to switch to a SWG and below is some information about my pool...