Search results

I have a brand new heater that was installed last fall. I started to get this error this week and wasn't sure what to do?

I am not sure if checked for exchanger leak. Is that an easy test? Any good online places to buy heaters?

My heater was turning on for 10 secs then off. I had the PB come out and look at it. While using the key pad on heater he said it began to smoke. Options that he gave me were to replace the unit for $4700 or replace heat exchanger, control board and membrane for $3100. Seems a bit pricey...

I have had 3 LEDs go bad this year. The first 2 were under warranty and the 3rd is not. The PB wants $474 for the light and $150 labor. Yikes. It looks like I can get this on Amazon for $350. Is this something I can do myself or is it best to just have the PB do it.

When we turn the heater on for the pool or the spa the temperature will not Get above 83°. I looked at the graph in ScreenLogic and it appears that the heater is trying to bget above 83°. I looked at the graph in ScreenLogic and it appears that The heater is trying to keep the temperature around...

Pool temp is 80 and the heater is set to 86. It turns on and clicks 3-4 times over a 1-2 minutes then shuts off. I can smell gas so there appears to be gas flowing. When it was working a few weeks ago I could hear the heater "fire" now I don't.

Screenlogic says it is on but it is not warming the pool and it is not making any noise at the actual heater. Any tips or tricks to get it running.

Thanks. I actually found why the pool looked like it wasn’t running..... I added DE last night and the sand filter was clogged. Backwashed and now running. Can’t decide if I want to add DE or not. Pool is a little cloudy and I’m starting SLAM again!

Every time I try to change the schedule it adds “pool 8-5”. My concern is if I add other features for that pump that overlaps the pool being on from 8 to 5 which will it default to. Could you have a setting that has the pump run from 8 AM until 7:59 am the next day and also have several features...

I have searched and can't seem to find out how to remove my burned out bulb in my spa and replace it. Do I need to drain the spa to remove it and does anyone know how to remove the intellibrite bulb. Thanks

With the help of Jimrahbe I was able to get my valves working by plugging them into the main board on my easy touch 8. I still have several connections on the board that are not plugged in and I am think I will need to get these plugged in to get my features working? ( pool lights, patio...

I filled the pool the last 2 days and turned the pool on this am by taking it out of service mode and opening all the valves. I have a spa that has been open all winter. I think the water is all going to where I’d like it to go but I can’t get the screen logic to highlight the “pool” button when...

The valves are closed.

The wires were not labeled. I did label them to make it easier for closing next winter. I will attach a picture below it might be hard to follow. Basically I have the spa and three Other pipes going into the variable speed pump. I have three skimmer baskets one in the shallow end, one in the...

I got all of the valve wires hooked up in the correct position and labeled. The valves work! My next goal is to locate the main drain pipe. There are four pipes that go to the variable speed pump but none of them appear to be the main drain. One of them is the spa and I believe the three others...

J, I found the culprit. I didn’t know there was a panel behind where all the buttons are. I took a picture of it and it looks like everything is unplugged for the most part. Can I plug those in at any of those locations or are they specific?

Thank you so much. That seemed to allow me to control the pump and it now is switched from Lo-T to Pool. I am trying to drain a little bit of water from the main drain so we can repaint the pool and the valves still do not turn. They won't turn even if I move the manual switch in the back of...

I downloaded the ScreenLogic configuration app and found a few more pictures that might be helpful.

I appreciate you guys helping out. I downloaded what I think it’s the newest version of ScreenLogic. I took some screenshots. I could not find the circuit section on the new app.

Yes, I have screenlogic.

I believe it is called the easytouch 8. Here is my issue. I am trying to open my pool and can't seem to be able to get the valves to turn on. I have a spa and it was open all winter and isolated from the pool. I have turned off the freeze protection mode (i believe I did this in the circuit...

On the main screen of my easy touch it says: Auto Lo-t Air How to I switch from Lo-T to pool mode?

When I move the toggle switch on my Pentair nothing happens? I have the easy touch in service mode if that matters. I can't turn it in Auto mode because the suction is coming from the spa and it is empty.

I am opening my pool for the first time and I am trying to get my valve actuators to "turn on". I have an easy touch and was wondering if I need to adjust a setting on the easy touch to get them to work. I tried to move them manually but they don't budge.

Picture attached, There are several of these long cracks.

We have a 2 year old pool that has multiple cracks in the bottom and sides of the pool. Most of the cracks are long and run between the infloor cleaners. The pool company that installed the pool just drained the pool and put something in each of the cracks. Then cracks might be fixed but the...

I have a ScreenLogic scheduled to run my pump from 7:01am -7:00am everyday. I have checked a few times throughout the week and the pump will not be running at all. Just curious to why the pump shuts off even though my schedule has it running all the time.

I have a question on what the "pool" button does on the app. To get to the button I log in---->hit the pool button ---->From there I can control the heater and there is a button at the top of the app "pool". I can hit this button and highlight it but I am not sure what it does? I hit the...