Search results

@Jimrahbe Argghh.. So I managed to get a windows virtual machine running and managed to get the pentair screen logic configurator running, but now in this menu I've managed to somehow select these settings and there is no reset or delete so I can't put them back to normal. None of the "circuit...

@Jimrahbe I couldn't get the app to work and in fact somehow I messed up and my heat pump now says "solar". What app on PC is used? I just installed a windows VM so I can run anything on win10 now. I tried pentair screen logic connect but can't seem to edit anything and Pentair's download...

I’m using the SLconfig app -

Not sure how I get to that screen - I don’t see it in my Screenlogic app. I can’t seem to find a way to add new circuits.

We have IntelliFlo pool control and variable speed pump. It is setup that under pump I have 4 settings: Pool, spa, cleaner (in-floor) and Spillway My question is this: Can I add a second "pool" setting with a higher RPM setting so that I can schedule the pool to run most of the day at a very...

Our pool installer put very small eyeballs into our pool because they can't get enough pressure into our in-floor cleaning system to meet factory spec. We have since put that on a separate timed circuit so pool return is not active during cleaning cycle. So now I'm thinking these small (3/8")...

Heat pump will do next to nothing at those temps and even if it did unless You ran it 24/7 the pool would drop overnight and it wouldn’t be warm. It would likely take 1-2 days of running just to get it to temp and it would cost probably $10+ day to run

Natural gas has a definite smell. You had the valve turned on obviously when they came to check it? Did they use a sniffer? If they did, then it should be safe as they can detect very low levels. That begs the question of what you were smelling originally. At this point I guess it's safe...

Reading through this as I've have some similar questions, then I got to your concern about running "800!" watts for 4-6 hours a day. My pump is running almost 2500 watts for 9 hours a day and my pool is less than 1/2 your size, so don't feel too bad!

James - Unless it's running at full speed, the pressure isn't even close to what the IFCS requires. At the start it was getting only 3-5 PSI at the slower speed (2450rpm) with the spa overflow running. Only by turning pump up all the way can I get spa overflow enough to enjoy the noise and...

So I think I fixed my sig with proper info. The pool company takes care of the pool first year so I've not done any testing. I note they put in about 1/2 gal of muriatic acid weekly and maybe once a month they add about 4lb bicarb. Here is picture of the pool.

Yes, I have pentair Easytouch automation. In the app I can’t see where I can change speed of pump in a scheduled event, but obviously I missed something. If I can, then I think I will ask them to install one more automated valve so IFCS only runs a few hours a day with pump at full speed and...

are you sure it’s not a rhombus? probably not, I just like the word rhombus and never get a chance to say it. rhombus

If the flow rate isn’t high enough the spa spillover makes no noise, and the noise is part of what we like about the pool. So that’s why it needs a certain flow rate. I was thinking along the lines listed above - having our pool builder put in another automated valve on the IFCS so it can run...

We do have SWG, neglected to mention that.

I have no idea how much we "need" to run it. Pool is in a cage in Florida so no leaves/debris just some sand and dirt from the environment. We like to hear the spa overflow running when we're outside as it's a nice feature just to see/hear but I doubt we need to be running our pump full speed...

(Our first pool....) So I'm not sure my pool builder designed our pool in the best way possible and hope I can get some feedback. Background: new pool build last fall. We have one Pentair intelliflow VS pump. It runs everything. The spa and pool modes are handled one at a time via a...