Search results

New valve installed and working fine. Thanks again!

Thanks homegameroom!!

There is some leaking coming out of the round housing that sits below the gauge on my air pressure relief valve. I found what looks to be the same part on Leslies called a High Flow manual air relief valve. Is this part easy to replace? And do you think this is where the problem is? We have...

The repair guy said maybe there is water coming through the fill spout on the pool even though we have the faucet shut off tight. We dripped some red dye in front of the opening and it isn't showing any water coming through. When the pump is on and we hold our hands in front of the fill spout it...

LOL. There is definitely no auto-fill. We didn't build the pool but have been in the house 5 years. I also thought about somehow ground water entering the pool but I don't see how since I don't see any cracks, etc. I will see if the repair guy has any ideas tomorrow. I will report back if I...

We do not have an auto pool fill and live in the desert. During the summer I have to fill my pool a few times each week. The last time I filled was 2 weeks ago and we have still had weather in the 90's to 100's. The strange thing is my pool water level has increased to where it is now at the...

Our Hayward vacuum usually works great. We had a big windstorm and it started moving slowly and staying in the deep end of the pool. My husband checked all the hose sections were clear, checked pump basket was clear (including the pipes coming into and out of pump basket), and we cleaned the big...

The wire from the sensor is going to the SWG. I double checked and the leak is coming from a hairline crack in the white piping piece just below the gray cap/sensor. Do you know a good place to purchase this piping online or just go down to Leslies? Any tips for installation? Thank you!

There is a hairline crack on the top black piece of piping (where the wires are coming out). We have wrapped with yellow plumbers tape and it held for awhile but is back to leaking. We need to replace that entire middle section of pipe. How hard is this to do? Just disconnect the wires...

We have a small leak coming from the top part of the pump where the electrical wires are coming out of (see photos). Is this something we can easily repair? I'm thinking we unscrew the top and use plumbers tape?