Search results

I do have the K-2006. I used the 25ml (thanks for the info on the 10ml). Two scoops of R-0870. Then 10 drops of R-0870. Multiply by ooops! I used .02 instead of .2. So I have 2 for my FC and .2 for my CC (One drop to get the water from slightly pink to clear). Is 4 a good target for FC?

If I do the pool math and enter .2 for the first box and leave it 4 on the second with 8.3% bleach it tells me to add 3.6 OZ. By weight is set to unknown and by volume it is set to trichlor. ??? Effects of adding chemical calculator says if I add 3.6 oz of 8.25% bleach will raise my FC .04 Am...

There is a port for the intake and a port for the return. The intake is down about a foot. I can screw on an adapter and instal the...

Tested the Chlorine again this morning. Water looks real good. I have .2 for FC and .02 for CC Can test the CYA for a week. Added the Stabilizer yesterday. I'm to grasp how to switch over from Chlorine tabs to bleach. How easy is it to maintain with bleach and how do you know how much to add?

I did not weigh the stabilizer. It was 1 3/4 lb container. I used about 1/2. I used my chlorine floater today because I still have a bucket of 3" pucks. Kiss for a frog. I went to fleet farm today and the best bleach I could find was Clorox Germicidal. Sodium Hypochlorite 8.3% Other...

The test was done before the stabilizer. I did not brush it around. I am guessing now I should. And for how long?

Well, I am trying to grasp the chlorine test from my new TAYLOR TECHNOLOGIES INC K-2006 TEST KIT. FC .24 cc .04. My cheap test block was indicating low .3. If I am getting this right the block would be total chlorine. and the Taylor kit test for free chlorine and combined chlorine. Regardless...

Hey guys. Thanks for the heads up on the test. That may have frustrated me as well. I think I would be looking at 30 to 50 for CYA. I have a cartridge filter and I get direct sun from about noon till night (with a solar cover). I have a cheap Intex pool. It came with a skimmer basket attachment...

I just added 1lb of stabilizer 100. I will run my filter all night and test in the A.M.

Ok guys. Not sure if your still with me? Here is what I got FC .24 cc .04 PH 7.4 ALK 180 Calcium Hardness 180 Cyanuric Acid I could not get the black dot to disappear

Sorry guys, I got real busy at work. I expect my kit tomorrow. I have been watching the pool as I did the last 2 years with my test block. PH is good and chlorine is still high. I am eager to try the new kit. I will post as soon as I get it and read up on it. This week end I am sure I will be...

This is the test kit I bought TAYLOR TECHNOLOGIES INC K-2006 TEST KIT COMP CHLORINE FAS-DPD I am currently using a VUE Block test kit from Menard's (Chlorine+PH only). Thank you for the information on Fleet Farm! I will add my information of my signature tomorrow. I am late for a graduation...

FYI. I was going on vacation and I noticed my water was beginning to look cloudy. I bought some super water clarifier from walmart and used it. When I got back 5 days later my pool was green. My floating chlorine dispenser was empty (I didn't check it before I left). I shocked it and added...

Wow Hudson! I was just there a Valley Pools and Spa to get my water test. I see CC is Combined Chlorine. The only chlorine I see tested is Tot. Chlorine (10) and Free Chlorine (10). The water is clear till you get near the bottom. Then it becomes cloudy. I am told I need to keep filtering and...

Ok. Went to a pool store. First and last time! CYA level is 20, Free Chlorine 10, PH 7.8 Total Alkalinity is 146, No algae,swamp,slime,ect.. They told me to add .75 lbs of Lo'N Slo. I did not purchase it I had PH down. They did sell me Stabilizer and told me to add 1 lbs. I did not add this yet...

I don't expect my kit till this Thursday. I could cancel my order and look for a pool store that sells it I guess. I diluted the sample and the PH is right where it needs to be according to the sample block 7.6. Ill do some digging and see if I can get the kit today. Thanks for all the help!

Thanks. I guess I'll just have to hold out.

Here is the VUE Block test kit I have. http://www.menards.com/main/search.html?search=pool+test+kit My Chlorine is off the cart and my PH seems to be about an 8 on the block. Says I should add acid to lower it to 7.2 -7.6. I have a bottle of HTH PH minis?

I did order the K-2006. I am guessing I will not see it till the end of next week. Any suggestions on the pool till then? Last night I used the rest of my shock up. Out of frustration I used more than twice what i was supposed to use. However I can almost make out the blue squared at the bottom...

O.K. I bought the kit. I will have to wait to get it. I hope you guys can walk me through it.

So this is what I need then? http://www.amazon.com/TAYLOR-TECHNOLOGIES-INC-K-2006-CHLORINE/dp/B004BGF7TI/ref=sr_1_1?ie=UTF8&qid=1405133771&sr=8-1&keywords=FAS%2FDPD+chlorine+test

Sounds real confusing. My neighbor keeps telling me if I put a salt water system on intex pool I don't have to worry anymore. Is this true or do I need to buckle down and learn the tricks of the trade?

I have an Intex 48 Intex 18' x 48" Ultra Frame Swimming Pool. 6,423 gal. I am testing with a 3 and 1 test strip and a VUE block. Free chlorine, PH, and alkalinity. I have shocked my pool 3 times. The green water is gone. I have teal cloudy water now. I cant seem to get rid of it. Any...

I am having the same problem. I have shocked 3 times. Killed the algae but the water will not clear up. I have tested with a 3 in 1 test strip (Free chlorine, PH, total alkalinity). I also use a VUE block test kit for Chlorine and PH. Intex 18X48" pool. 6,432 gal. Using supplied filter system.