Search results

When he said compatible with Jandy did he mean the would work with aqualink or that they would fit the fitting?

i just installed a iq900 that I bought on eBay for very cheap. From what I have researched it is the same as the newer iq20 except the iq20 has updated wifi software. This wasn’t an issue for me because I was going to hardwire it anyway. I have a PDA 7.0 system and like everybody else i’m pretty...

Pool Clown you're awesome worked like a charm. It's amazing that you have to got though this to get it to communicate with Aqualink.

yes it work manually.

I did both temp up to full and put it into remote mode and yes there a temp sensor in the pipes.

My new Pda system isn't controlling my new Raypak heater. It seam I have done everything correct. Connected the wires to the Jandy board in the correct spots and put the heater up to full but the pad doesn't control the heater. Do I need to use a relay for the heater?

they are controller by Jandy PDA

Just wondering if anybody else has this issue. When I change the colours on my Jandy nichless lights, my Pentair VS pump switches speed for a few minutes and then go back to normal.

I have pda system but the purelink does't show up in the menu. Is there wires that should go from the salt gen. To the Aqualink board. I can't fine anytime in the manuals.

I understand what you're saying, but the waterways jet bodies have 1.5" air lines and the Hartford loop is already buried in concrete so the only option is to up size at the loop to the pad. Do you think this will help?

That's what the jets have. Should I up size at the Hartford loop?

Thanks Yes Hartford loop, 2.5" supply lines down to 2" at jets and the air line is 1.5". The equipment is about 3'-4' away.

I'm just about to finish up the plumbing for my spa and I would to see if anybody know if the air lines should be looped. I can't seam to get to a few area so I was just going to tee off another jet and cap the one end.

I completed installing all my panels for my 12'x24' pool and I wondering what the tollarences for a steel wall pool. I'm less then 1/8" off level for all the panels Conner to Conner I'm off about 1/4" from square. Most of my panels are within 1/8" from plumb one is a little more maybe 3/16". I...

That's what I was thinking but just want to make sure. Is there always a little gap between the liner track(coping) step gasket? It seams not matter what way I were to do it there would be a small area where the liner is not the track or gasket, maybe 1/2" or so.

Sorry I guess I didn't explain it properly. I my step is cantilevered and I plan on putting a stone coping. My question is I have a double track coping that is 3/4" high, should my stair be flush with the top of the track or flush with the wall?

Anybody?

Hi I about to install my fiberglass step for my steel/vinyl pool. My wall are in and I need some help. I need to know if the top of the steps should be flush with the top of the panel or should it be flush with the finished wall (wall + coping).

I just about to start my 12'x24' pool and I'm wondering how many led lights I should put in. My current plan is to put 2 of the Pro series 30w lights on 24' side approx 1/3" from either end. Will these be enough to light up a pool this size. From reading other post some people have been...

I was wrong it looks like the 1st step would be almost 18" with a 48" panel and a 42" step. I guess with a standard 42" panel the 1st step is around 12".

I'm about to order my panels and step for my build this spring. I have a friend that work at the pool company and he has offered me a 48" tall panel for the same price as the 42". The issue is that the only 48" steps they have are white which I don't want. So my options are to use the 42" step...

Hi I'm about to order my vinyl pool kit (12'x24' rectangle) this week and I struggling on where to put my skimmer and returns, but more the skimmer. The winds come from the west so I know the ideal location is along the east side in the deep end however I want to put a sunledge in that location...

Thanks, that make sense. The design is not to scale I just wanted to spread thing out to show my setup. One more question. I plan on putting the equipment in a partial pit (16-18" blow grade) is there anything special I should to to the plumbing. ie extra check valves or shutoffs.

I do plan on putting Hartford loop in. As for the check valve between the heater and the swg I'm just going off the instruction from Jandy. I can't see it doing any harm having one there just add a little cost but could save me if there is a warranty issues with the swg. Does everything else...

No blower just relying on Venturi air draw. The spa will only be 5-6' away from the air intake.

yes it raised 12" above the pool

Ok I getting closer to construction (hopefully march) and would like some input on my updated plumbing. I have tried to simplify it as much as possible, but have decided to keep the spa bypass just in case I need it. I have read on here in many post that because of the high flow rate needed for...