Search results

Finally picked up the fine filter after using the standard for over a year! Makes a big difference in my pool..wow! 2-3 cycles and it’s spotless I also inspected and cleaned the impeller ..it had large amounts of landscaping (muhley grass) and hair wrapped into it. Cut and cleaned that off ...

Updated pics

Video of leak

The pic is from the skimmer lid looking down into the pool..back side of skimmer ..weir door area ..

Winter weather caused me to turn off autofill..noticed a decent water level drop..did bucket test to confirm. Been loosing 1/4-1/2” daily. Notified PB, he came to look, in the meantime I got some dye and tested around, landing on the skimmer. PB got a leak company to test everything just to be...

Pentair 140 Connected via rs cables I think I may have figured it out … I setup my pool circuit 1200 rpm to run 24/7 Skim FC runs 2500 rpm 8-10a and then again at 7-9p I added another pool circuit on from 830p -730a and also added another pump bump speed FC to run with it at 1700rpm...

I’m having a hard time figuring out how to schedule my chiller to run at night, say from 8p to 7 am. I like to run my pool 24/7 low speed with a couple of bumps in speed through the day to skim. I can’t figure out how to select it or creat the right feature circuit or group to accomplish...

While tend to agree certain situations do arise. For instance. I have had my SWG set at 50% for weeks and have been sitting right at 5-7 fc. I Ran the spa over the weekend which I manually have to turn my bypasses off to be able to run my setup properly. My normal pool speed runs at 1200 rpm...

Any update to this ?? I sent a message to support ! What a bummer it doesn’t work! Anyway to do it through the intellicenter physical panel ?

Okay. That makes sense. What questions can I ask the pool owner to do to figure some of these things out? Can any of this be figured out if I had access to the SL config app via remote access ?

I don’t have an older computer to load that program on and I’m not local to the pool. This is what is going on currently: I removed the skim profiles to just see if it would run the pool normal without issue. Pump is off, but schedule shows it should be on? I’m at a loss

I’m not sure exact model. Intelliflo 3vsp. Also not sure what it’s programmed as since I can’t access the config app. Not that I can tell Is it possible to figure out the time on the system? Maybe time zones are off from when I’m expecting changes ? Should I reboot the panel ?

Disclaimer - not my pool, trying to help a friend troubleshoot Went to a friends house this weekend, he has a Pentair setup, 3HP VSP,chiller,master temp and easytouch. I thought something was odd when I went to look at his equipment pad, pump was loud! It was running at 3400 rpm and had been...

I think my thoughts on what robot works for an appropriate price point is leading to the aqua614q. I recently picked it up 849 out the door via marina. Dual motors and brushes Powerful suction Does work on my deeper Baja ledge App wifi control -steerable, remote access, can drive it...

1.064 Success! It was not! Was set to heat pump not ultra temp ! I should have not something wasn’t adding up, because it was not asking me to set a heat and cool temp range, simply just a single temperature. I deleted the current configuration of the heat pump and added it back new properly...

I verified do have a solar sensor in place, opened the panel and traced it. It also shows up in the app under history. Tightened all connections. I removed the other wires that were piggybacked, it was a wifi modul or something that I’m not using because I’m hardwired via Ethernet. Restarted...

I turned the control to off and ran it manually via the pad, and it did come on! so that's positive. when switching back to rs485 control and calling for heat via the control pad, nothing happens, it says IDLE F * Im not sure what to do about that...its certainly not getting any request from...

Thanks for the thorough reply! I adjusted the pad to max on both and that did fix the problem for now, but I would like to move to the Rs485. Can I hijack the wire going to the fireman's switch to hook up the com port on the heater? Do I need the full 4 wires or can I just use the data...

New pool build complete Intellicenter I8 installed, master temp 400 as well as heat pump 140 I was having trouble getting the heater to come on line when called for via the intellicenter app. I would call for heat to pool, it would come on but only up to set point on the panel, not what I...

Yes I have started to water the shell in! Sprinkler is set to run during the day. Temps are dropping here this week, lows in the 30s. So that should help with cure temperature! Thanks for the links @kimkats

Gunite done!

Dig day is here! Quick question for anyone. What should the slope be from shallow to deep? We’re going from 3,6 to 5,6…do I keep the shallow flat for say 10 ft and then slope down giving roughly 1” drop per foot? My PB said he usually just pulls a string from shallow to deep and makes it just...

Thanks! Sunken spa Pool is mostly an activity pool, 3,6” to 5,6”