Search results

All the numbers are pretty steady... new numbers: FC/TC 5ppm PH 8.0 Alk 70 Hardness 350 Cya 60 Salt 3200 Borate 50ppm For me to maintain 7.4-7.8ph I have to use 1/2 gal of acid per week or more. Which to me is to much for only 16500 gals.

Thanks

Ph is high and alk is 90. Can’t read ph over 8 but it’s up there

Ta and ch appear to be fine but it’s still early. Ph rise is crazy. Calcium noodles starting to come back slowly

Looks lik ph rise is still around .1-.2/day with borates at 50ppm. Does it ever stop? Im rising .1-.2ppm/day. Chlorinator at 40% all water features off. I was told this will get better over time but it hasn’t. These calcium noodles are not joke either. Tired of fooling with it. There has to be...

Confirmed ph rise today. Last add was Wednesday was 7.4 and Friday 7.8. Will not add acid for a couple more days just to see but I can’t measure above 8.0. ChH still 325

new numbers: FC/TC 3ppm PH 7.8 Alk 80 Hardness 325 Cya 60 Salt 3300 Borate 50ppm Drained half the pool got hardness down to 325. PH rise is still and has always been excessive. Im trying to target 7.6 but in order to do so will have to add acid every 3 days. I get it to 7.4 but its back at...

FC/TC 2ppm PH 7.9 Alk 80 Hardness 375 Cya 20 Salt 2700 Still a little high on hardness so will drain more and refill. I dont see this hardness issue going away. Fill water was 100ppm. Want water as close to perfect as i can before I add borates.

Last I checked was around 150 when I filled it. Have not refilled to much this year. I try to catch rain water by raising the level on my auto drain. All water features stay off as well except maybe one day on the weekend. I will check fill water again today.

Updated the post. Taylor test kit and a jandy swg

4 yr old pool, constantly has high ph and high calcium hardness issues. I recently drained the pool and did an acid wash all by myself... somewhere around May. Came out pretty good. Restarted the pool got all the numbers right everything fine for the first month or so. Calcium hardness upon...

Im running this pump exactly as described and it gets the job done. Thanks again. If you ever figure out a way to have direct commuincation please hit me up.

Rewired through the relay and setup as described. Only thing when I hit spa on the app pump just stays on schedule. I have to turn pump on and off from app if I want high speed. Better than nothing for sure. Thanks.

mine only overides for 10-15 mins then resumes preset schedule

thanks for the reply...do you know how long the pump should run in override? So I am the installer and I am willing to try things. One thought is to try the jandy speed drive from the water feature pump...kind of scared to do it but I got a feeling it will work. Right now the pump is wired...

Vgreen EVO 2.25Hp square flange pump so its the one that does not have the controller on top just the single button. thanks

Bearnings went out on my two speed stealth so I made the decision to upgrade to variable speed. The company that sold me the motor did not consider commuincation with the aqualink RS. After pump was installed and running no communication can be made. At least the little I tried before finding...