Search results

I replaced the pressure switch (although now I know it was not the issue). The issue was the control circuit board. The voltage going to the transformer was low so I replaced the control circuit board and all works now! I wish I would have figured this out before replacing $1000 of parts that...

Not sure why it won’t load

Sorry, file did not attach

I have low voltage out of the black wire (far right on pic). Range should be 102 and I’m pulling 60volts. Any suggestions other than replacing the entire board

No, I replaced the igniter twice so I know that I have a good igniter. I checked the gas pressure and it is close to fine. I need to check the power going to the igniter next. I have to buy a multimeter and learn how to check it. So that is my next step

Need help adjusting manifold pressure on Jandy LXI propane gas valve (see pics). I replaced gas valve and still have Ignition Fault so I used manometer to test input pressure (all ok), but my output pressure is running 7WC instead of 9WC. I removed the black plastic cap and tightened the plastic...

I checked gas readings. Input pressure should be min 11 WC and manifold should be 9 WC. Input was 2.8 kpa (which is equivalent to 11WC). Output pressure was .2kpa and should be 2.2. I attempted to adjust the pressure but when I tried, the pressure did not change and I got nervous about turning...

Is there a way to check it without having to buy a new one?

I have been trying to get my Jandy LXI 400 (propane) working for the last year and a half and still no luck. Here is the latest: Blower comes on, I hear the 3 clicks, I smell propane, nothing ignites, get “Ignition Lockout” error. So far I have: 1) replaced flame sensor 2) replaced ignighter 3)...

And we checked the air flow switch with a multimeter.

We replaced the capacitor on the blower fan. We replace Fenwall control module and the gas valve. The fan comes on. We smell propane. But it gives a Check Ignition Control error. We checked the rubber hoses and even sucked on one (someone said to do this). We replaced the gas valve and the...

Propane Jandy LXI worked a month ago and now it is not. First had "Check Ignition Control" error. On Fenwell, it was flashing 3 times for "Ignition Lockout". Cleaned pool filter and Replaced the Ignitor and Flame Sensor. Then error on Fenwell flashing once for "Air Flow Fault". Replaced...