Search results

It must be the surge card. The cable connects to COM3. COM1 and COM 2 are open

Trying to hook up the low voltage control line for an intelliflo to an easy touch. The J20 port on the board is already filled with a wire that goes back to the other control board. Do I double up the connections? Or do I need to use 'COM1' or 'COM2' on the rear board? They appear to be...

Thanks for the detail. Are there any functional differences between the two? Or is it just for them to keep track of warantee

So 342002 is the new 342001, but I can still buy both, and they are different prices? Is this just an inventory glitch, or are there actual differences between the two?

Model 356630S. Build date 9/17/2016 Checking to see if anyone has done a bearing replacement on this and knows the ID numbers. Its running now, so I am trying to get everything together to do it in one day with minimal downtime, but it seems like there is some variation in bearing IDs on these

This is year 7. Probably worth replacing still?

Pump started up like this. Flow seems normal

I'm looking to replace an old Loop loc cover with a Meycolite mesh cover. Those seem to be the only brands with a 14 x 32 option. Is the anchor spacing the same between the two? I would prefer to reuse the old holes at least.

This has been here for at least the 10 years I have owned the pool, so I suspect it was original subsidence. If I poke at it, it seems shallow, so I'm going on the assumption it's gelcoat only Since I'm going to close up soon, I would like to take care of it with some polyester resin. What is...

I haven't installed it yet. I can't seem to find a good picture of what it's supposed to look like. I'm guessing that there is a particular orifice size it's supposed to have? I bought it online, so I'm really trying to avoid the hassle of sending it back. I suppose I can try and see if the...

I just bought a new clean and clear rp 200 filter. I was taking it out of the box and noticed a small, fingernail size piece near the suction relief valve. It's not exactly clear how it would fit back on to it, so I'm not sure if this is something sort of injection molding scud or something...

I noticed the intellichlor was out the other day. I unplugged, then plugged it back into the control board, and it worked for another day Now it seens to only work when I hold it in. There is corrosion only on the DC pin. No water seems to be leaking anywhere. If it is just the harness, that...

Pool was Initially clear before memorial day, but the salt was borderline low, and the swg went off for 2 days for low salt before I noticed. I added more salt and shocked since it turned cloudy. The next day, this persistent green appeared. The water is as clear as it can be. There is hardly...

I'm case anyone pulls up this thread in the future, the problem was the cell, not the board. New cell is working just fine

I did some quick math. The cell is from 2012. I'm probably at least at 8,000 hours, if not 10. So I'm rolling the dice and buying a new cell. Let's see if this works

I'm geting about 30 vac into the board. No plate shorts either. I found this old thread. Looks like someone else for 27 VDC and no lights. Must be a specific failure mode. Pentair Intellichlor IC40 Chlorinator--Lights Are Not On

AC is good. DC 27 volts, but should be 39 according to the board. D1 only lights up when the harness is plugged in. Maybe the board is starting to go?

Ic-40 hooked up to Easy touch went out last night. No power at all. On the control board of the easy touch,D1 is flashing red when harness is plugged in. Any troubleshooting tips? I have access to a multimeter

I dont see any visible dirt (other than the sand, which just "shows up". It is an old filter system (im guessing original to the pool - 1999 ish). Makes me think I just need to upgrade this last piece of equipment. And yes. Concrete deck.

Southeast Michigan location. It's gritty sand, not organic or soluble. It shows up regardless of water conditions. Fc/cya is typically 5/50. Ch is 100 ish.

I have a persistent and annoying problem with "sand" not getting filtered out in the catrtrige filter. The sand is probably just the insoluble part of dirt that ends up in the pool. It collects underneath the return jets and in the bottom of the pump basket. Is there a trick to getting this...

Wire is a PITA to pull long distance. Bigger conduit the better. The Pentair easy touch is basically a sub panel with automation that makes it easier to upgrade. I have exterior outlets, a pump, and a heater run off of it. They are all on separate breakers for convenience.

I am replacing a single speed with a 2 speed pump. I get the general wiring concept, but am unclear on the relay. Do you need the special Pentair relay, or can you program one of the auxiliary relay for the second speed, and just stagger the start and stop times?

Does the impeller change with horsepower?