Search results

Where I need to install the Softener is close to power, water and sewer. I have my Cyclone flushing into our sewer line to recapture all the water so I think I am good with the utilities. I think this is an easier solution and faster fix for the long term use, running another line is nearly...

We have PEX plumbing that runs through the attic... yes our cold water runs through our 150 degree attic... anyway, I would need to tap into the PEX and then run a line to the outside of the house, on the other side of my house where the pool equipment is. When we had the house built we have a...

I researched the site but did not find a definitive answer or help on installing a stand alone water softener to the fill line of a swimming pool. I was looking at installing a Rheem single softener unit to help with the hardness here in Arizona. After year 2 my pool is over 600 hardness and the...

WOW, super nice build! I just got done with my outdoor shower tile in the 110 AZ heat! I do not want to post pictures and highjack your thread. I an still looking into the chiller but have not pulled the trigger yet. I have a ton of questions on the plumbing.... It looks like it is not a closed...

I was reading up on the glacier Chiller as my pool is getting very hot here in the AZ sun. I have been running the waterfall and fountain in my spa along with my airater and it feel like I am loosing the battle and water in the process. I love the reference to the water temp control device (my...

Have you tried to program your pool system to turn off and on your chiller with temp instead of time? I am thinking of getting a chiller with my Intellicenter system and would like to use the temp to control the actuator and fan like my spa heater....

Just a follow-up on the ETi 400K heater control, yes the fireman's switch is used to control the heater on/off functions. I have the ETi set at 104 and the Intellicenter set at 100. The intellicenter actually controls the temperature tighter than the Eti heater. Well all is working great! Now to...

MyAZPool, Thanks! I reviewed the ETI manual and the only connection is the "Fireman's" switch connection to turn the heater off and on. I will play with this more to see how the heat is adjusted. now to the next question..... (hahaha! It just like having a race car, just one more gadget, and one...

All, Thanks so much for all the support! My new Intellicenter is up and gunning Great! Cell phone work, PC works and I am Happy that my system is now working the way it should have from the builder! OK EDIT, I do have another question, probably for @MyAZPool I was wondering about the ETI Heater...

OK, Jim you sent me down the correct path! I do not need the protocol adapter just the wireless link stations that go directly into my Router. So all is good, I was able to log in and see my system on our phones and everything is working. BUT... I still am confused on how to access my...

OK, I need some help here I cannot connect using the screenlogic interface wireless link? This hardware came with the upgrade kit and it was the sme system that I used on the intellitouch with no issues. So I am not sure how to configure the intellicenter to connect to Wifi/? I currently have my...

No salt water for me.... OK, the system is in and programed, all actuators adjusted and working great! Programs are in and working great! Everything is great EXCEPT...... I cant get my intellicenter on line! I am having major issues with the screenlogic and wireless link kit. Searching the...

OK, all of the hard wiring is in, Added 3 Valve acruators, a power supply for the waterfall light, And the DC LED power supply. All lights on thier own relay. Waiting for tonight to swap the board out. It is 114, time to swim, not work! Thanks for all your help!s

OK, another question for the masses... I was playing with my color swim lights last night and started to re-think my plan. Currently I have my waterfall and Baja step lights on the same transformer and wanted to hook the Baja light direct to the main pool light. I purchased another transformer...

Same here tried the current fix and it did not work? Are you using the XML Link? Are you using the RSS link? Or just opening up the airport in blue and using that link? I was trying to use the Phoenix Gateway airport and not sure if it works?

Gene, I was waiting on my friend that is a pool chemical sales rep who was going to get a test kit for me but not sure how long that is going to take??? I like the TF-100 as I already have a PH meter. Where is a good place to buy one of those kits? Also is there a good in-line system that works...

Gene, Done! Jim, Thanks for the input, I took pictures of the pages and made a word doc for reference later. I also watched a you-tube video on installing the upgrade intellicenter, looks like a direct swap for most settings. Looks like this Friday I will tackle this job so any input would be...

OK, finally received all my parts in today and the builder is officially done with the pool! So the question that I have is, from my current Intellitouch system can I save the configuration from my system and upload it to the Intellicenter system? If I cant save the current configuration...

MyAZPool, You are the pool guru!!! thanks for chiming in on this one. Yes, I have the upgrade kit on hand along with a 100w transformer and two actuators. I still need the actuator board and one more actuator to make my pool, what i consider efficient. the upgrade kit is the i10 PS kit. Looks...

So contacted the pool builder to add the intellicenter upgrade kit and valves, and because I purchased them they will not install them. They also said they have not received training on the intellicenter system so they do not support it. Well it looks like I am off the reservation on this one...

We put Abalone in our pool and it sparkles like the midnight sky during the day! Bling all the way!

Jim this is a tube in my deck that I drop tabs into and they get dispursed into the pool based on a predetermined flow rate. Also called Deck Chlor? I do not have a floating duck for my tabs....

Yes, I wish I had found this site some time ago!!!! So Jim, I am on the same thought process and received the Intellicenter upgrade board this morning, P/N: 522048, and a new 100w transformer to move the baja light off the same circuit as the Water falll light. However the actuator expansion...

Well we are almost done with our new build and after much to do with a reputable builder we still have some issues. First I will try to describe my pool: Odd shaped 20K gallon pool with 12" raised spa Grotto waterfall with a slide In floor cleaning with auto deck chlorine UV Sanitizer 2 3hp VSF...