Search results

Hey Jim, Your were spot on as usual and now the lights work with the app. If you are ever in Southern California, dinner is on me! Thanks again for all of your help! -Jason

Thanks Jim! I will work on that later today!

I recently remodeled my pool and added new Intellibrite 120V 5G Color LED lights (one for the pool and one for the spa) and a Pentair EasyTouch 8 with Screenlogic2. The guy that wired the EasyTouch was a disaster so I ended up firing him and fixed the wiring mistakes myself (thanks to the help...

Sorry for the delayed reply, but this fixed the issue and the IC40 is now communicating with the system. Thanks again for the help!

Jim, I do have the internal power center. Picture attached.

Hi Jim, I ended up finding a manual online and read about the remote mode. I am going to try that tomorrow. The heater works, but when it gets to temp, the system seems like it is cutting power to the heater rather than just switching of the burner. I will try switching to remote mode and see...

Well, the screen goes blank, so I was assuming it was losing power. The reason I say that is because prior to automation, the screen was always on. Also, shouldn't I be able to manually control the heater if in Service mode? The heater is connected via the two wire switch. Pics of the board...

Hey Jim, Came across another concern. I notice that when the heater turns off, the system is turning off power to the heater, instead of just turning the heater off. Also, when in service mode, the heater has no power. Like the pump. shouldn't the heater have constant power? I moved the heater...

Hi Jim, You are a life saver and were spot on with this. I switched the pump wires and now the power to the pump does not get cut when I turn it off, service mode works, and there are no more alerts. I rewired the SWCG and now that seems to be operating as it is supposed to. Turns off with the...

Hi Jim, Yes, I did run those two tests. When in service mode, the pump has no power, and the SWG still has power (Flow and Salt lights are red). The filter pump wires do go to Load 1 & 2 of the of the filter pump relay. Do I just move them to Line 1&2? The wires currently at Line 1&2 go to the...

Thanks for the info guys. Let me decipher the wiring to try to clear things up a little. Conduit (From left to right) 1) Power for the outlet on the side of the panel. 2) Electrical lines that run to the outlets around my deck 3) Electrical from the slide/waterfall pump 4) Heater 5) Filter...

Hello Everybody! I am new to the forum and hoping I can get a little help. I just completed a backyard remodel and added a Pentair EasyTouch Automation system with Screenlogic2, Intellichlor IC40 SWG and an additional pump (Whisperflo 1 1/2 hp) for some water features. My current pump is a 2015...