Search results

Can confirm I think we found the issue. That One Touch cycle I had selected in the schedule ends with an “all off”, instead of reverting back to the baseline pump schedule. I set another schedule entry to kick the pump back on at 9A and that got it to turn back on after the all off command from...

That’s an interesting idea, don’t change the clean mode and just restart the pump right after the clean mode ends to kick everything back on.

Oh man, I hope we finally got this! Thank you for all this help walking through this. Will report back soon.

So after that last update, still a no go - pump cuts off after cleaning cycle. That Clean Cycle is a One Touch that came standard on my system.

Here’s the schedule as of now with this latest feedback, plus the VSP screens.

No go - pump turned off after the clean mode after adjusting to this updated schedule.

Awesome, I’ll give that a shot!

Has anybody had this issue before? My Jandy VS pump just cuts off when the “clean mode” cycle finishes on my system. The way I have the Jandy AquaLink schedules setup now is a 24-hour/day @ 1400rpm base schedule, and then a 7A to 8A clean mode cycle at 3,000rpm. I’ve troubleshot it to the point...

Ok, I figured it was! Thanks Maybe you’ll know this one - is there a way to enter adding water to the pool from say a hose? Something like if I was going to add Muriatic acid to the pool. I’ve got a timer on my pool fill hose, so I’ve kind of gotten a sense of how much water is added in...

Hey All! Is there any way to attach a comment to a test result that’ll show in the logs? I’ve been adding a note after until now, but just figured there may be an easier way? TIA

This is fantastic - I’ll get my hands on an additional JVA and get this done! Thank you for the incredibly precise help.

Just hopped into the web end of the system and here’s how the AUX are labeled thus far.

Ha! Definitely confirmed the fix followed the picture you guys sent over with the main drain and skimmer on the same actuator. I really appreciate all the help - it was invaluable on my end!

@Ahultin hey guys! Heard back from the builder on this issue. He acknowledged the spa and main drain hookups are backwards, like we troubleshot so far in this thread. So after that change, and moving the actuators, should we be good? Are we able to have the separate pool mode/spa mode/spillover...

Ran through confirming the spa jets versus the make up line. Here’s the first configuration, and the result (no jet output, water coming up from floor): Then I switched the valve over to what I have labeled as the jets, and here’s what we got: So I think we nailed down the return side...

Ok, and I see which valve you're pointing out in your photo with the notes on it - the first valve in order on the return side. I just responded above trying to nail down the drains, if that helps on that side of things.

With it set this way, there’s the smallest amount of trickle over the spillover: With it set this way instead, the spillover is basically a waterfall within 20 seconds of changing from the prior valve setup above: