Search results

Good Morning All, I installed my liquidator with my AGP & it works great. I changed all of my hoses to tiger flex hose & the fitting do not leak at all. You have to really tighten the hose clamp around the hose & it will actualy compress the hose just a little bit, but that will let the rubber...

Jet4 Where did you order yours from? I'm looking for somewhere online to order them from. Thanx

Does anyone have the Royal Entrance steps for their pool? I am looking to purchase a new entrance system & really could use some advice. I currently have wedding cake style & I cannot keep the algea from underneath. I have drilled holes in the sides & front to try to improve water circulation...

I went back & put the flow control valve back on the liquidator & what do you know, it works fine. I can turn it to 3 on the valve & get full flow thru the indicator or turn it down to whatever I need. What is the ideal setting on the indicator? I know I will need to check it regularly but...

Update on installation of Liquidator I moved the liquidator up on the deck above the water line & removed the check valve that goes to the pump. I still did not have enough flow pressure to move the ball on the indicator, so I removed the flow control valve & now the ball is up to 3.5. I check...

I'm using clear Tiger Flex. It's solid with a white spiral

I can put the liquidator on the deck above the pool & cover it so the chlorine doesn't dissapate. As far as putting in ball valves, Do I just need to cut the hose coming from the skimmer to the filter on the pump & put on in there & do the same from the filter going to the pool? Thanx Gdog

I checked the flow indicator & the arrow is pointing to the pump, the check valve arrow is pointing to the pump & the flow control valve does not have an arrow. The arrow is pointing to the liquidator on the filter side. Thanx, Gdog

My pump sits directly underneat the skimmer. It's about 2-3ft at the most. I don't think I have a valve between the skimmer & the pump.

I installed the liquidator today, but I do not have enought flow to raise the ball from zero. I have the liquidator about 5ft from the pump & filter. There is flow going thru the tube but has very little pressure. I don't have any leaks at my fittings. I don't know what else to check. I checked...

Just ordered the 8 gallon!!! Hope to install next week Gdog

Thank you very much!!!!! :-D I am ordering the 8 gallon today!!!

I have a AGP approx. 21,000 gallons. Is the 4 gallon ok or do I need the 8 gallon liquidator? Gdog

CWORD, I'm here in Tupelo. Welcome to TFP!!!

Thanx, I'll try it. Gdog

Does anyone have any pictures of what black algae looks like? If so, could you please post them, I'm curious as to what it looks like in a pool. Gdog

Moderator, Can you please delete my last post about my CH level at 1600. I'm such an idot :oops: :oops: My CH is 170ppm.

I hope that is what it is!!!! I'll go right now & check to see & follow instructions to the tee. I'll be back in a minute Gdog

I did another test today, (this is really fun) & my CH is 1600. I didn't check this the first time & just did it out of curiosity. What would cause this reading to be so high? My water is really clear. Is this something to be worried about? I'm using a vinyl liner & I am using BBB. Gdog

Thanx for puttting together a test kit like this. It is soooo easy to use. Thanx to all of you for sharing so much information. Gdog

I'm BBB all the way now. My water looks much better than it did when I used all the pool store chems. Thanx for the quick response. I guess I just need to maintain with bleach now right? Gdog

FC-5 CC-0 PH-7.5 TA-80 CYA-45 I didn't realize the difference between this test kit & the ones you get at WM. I understand now why you guys recommend getting a high quality test kit. I think everything looks good (i'm not really sure) except for my CC. Any suggestions on what I need to do...

Thanx a ton. I'm ordering a new kit this week & I'll test again to see what's going on with it. You have been a big help, thanx for all the advice!!!! Gdog

Sorry about that, I should have replied to my previous post. Do I need to add bleach & get to shock level or do nothing & let TC drop on it's own? Thanx for the help, Gdog

I drained half the water in my pool. I ran out of the chemical to test my CYA so I'm ordering a new kit this week. My TC is still up around 8-10ppm. My test only goes to 5ppm. I'm refilling with city water, so is this why my TC is high? Ph is 7.6 My water now is crystal clear where before it...

I have switched completely to BBB. Before I switched to BBB, I put a heavy dose of 3" tablets in so I think this is why my level is so high & causing cloudy water. I have finished the drain & have started refilling. The water already looks much clearer. I'm going to test when I'm finished...

Is CYA the same thing as the 3" chlorine pucks? I am draining half the water in my pool because my CYA level was about 90ppm. I assume i will have to add some CYA when I refill, I hope not. Just wandering what I need to put in just in case I need to add. Gdog

Thanx for all the help, I'm gonna try it this weekend. Gdog

I've been reading the stickies. That's alot of info!!!!! I'm going to drain 50% of my water Saturday, add bleach & re-test Saturday afternoon or Sunday. After doing alot of reading I think the cloudy water is coming from high CYA levels. Draining the water should clear it up. Thank you guys for...

Do I raise my chlorine level by adding the bleach only? Gdog