Search results

To try and get some quick, accurate and easy readings, I picked up one of these on Amazon for $12. Quick, easy and looks accurate so far: VIVOSUN PH Meter Digital PH Tester Pen for Water

I added some MA and it cleared up. Thanks again.

Thanks

I put in the info and the result was a potential for scaling. It looks like the ph may be high since when I lower the ph the CSI was fine. Unless you have another thought, I will put in dome Muriatic acid tomorrow and see what happens. It is a new (water in 6/4/2020) pool and as I understand...

When I used my dolphin last, there was some white substance that was picked up. Never happened before and not visible to the eye. I thought it was the stabilizer that caused this. I will check on the CSI

Here is a recent set of test results using my Pentair Intechlor 40 run at 60%: Total Chlorine: 5.0 ppm Free Chlorine: 5.0 ppm Combined Chlorine: 0 ph: 8.0 ( muriatic acid added to reduce) Acid: 2 Total Alkalinity: 120 ppm Calcium Hardness: 375 ppm Stabilizer 50 ppm (stabilizer added to increase...

Moved from here. I have a similar issue with small surface particles. I run a Pentair 200 for 11 hours around 50. I skim before going in to the pool. I am talking about some pretty small sediment being picked up in a fine skimmer. The pool cartridge is cleaned every week. I use a Dolphin T35 3...

Not sure what it is attached to but it is working now as a "Gas" Heater. Thanks!

I had an issue with my AqualCal Heat Pump starting up with the IntelliCenter. The "fix" was quite easy but not intuitive. The AquaCal is set up with a two pin communication wire which is recognized by the IntelliCenter when you make the interface with a GAS heater NOT a Heat Pump. This sets the...

Amazing work! Will this work with Android or is there a similar Android project? Thanks!

Nice talking with you R. You gave me a great "jump start" on how to use the web client. Thanks for your support!! Best! Phil

Let;s try to talk Friday. Thanks so much for your assistance! Best, Phil

Went to log in and got this: https://intellicenter.com/#/installations Nothing comes up and can not log in

PS...Have a great night! :)

I am just not getting this! ARRR Can you talk me thru this? Let me know and I will send you contact info for tomorrow or another day that works for you. Thanks! Phil

Finally was able to send the screen Thanks!

Thanks I was able to get to this point. I do not see the pump: AUX-CIRCUITS (PANEL 1) FUNCTION SHOW AS FEATURE EGG TIMER SPA SPA NO 12H 0M LIGHTS INTELLIBRITE YES 12H 0M AIR BLOWER 1 GENERIC YES 12H 0M AUX 3 GENERIC NO 12H 0M AUX 4 GENERIC NO 12H 0M POOL POOL NO 12H 0M FEATURE CIRCUITS...

Some questions: 1. Do you do this done from the panel or can it be done from the desktop app? 2. When I go to the app on-line, I have under pools my pool and spa. 3. Under my pump view I have my VSF pump with current stats. I see no option to bring up the screen you are showing. I think my...

I had a similar experience and it took a Pentair tech telling the company that Screen Logic is not for Intellicenter. All you need of course is a modem that works or direct connect. Have a sit down with your local Pentair Techs/reps.

Couple of questions: 1. I just had my Intellichlor start up and there is a communication failure. While I am still under warrantee, I was wondering if this might be a wiring issue. The company who installed the pool had some issues with the pump and WiFi resulting in a Pentair rep coming to the...

The actual usage was greater than 18,000. The notice also came very quickly after the pool fill. I was somewhat surprised about the amount of water but knew it would be greater than what the anticipated use would be.

Thanks! I was wondering about the valve config. It is "off" now for the pool and spa. Seems strange to not pull some from the bottom. Thoughts?

Hi All! After living in my home for 36 years after the Live Oak tress I did not want to cut down to accommodate a pool starting dying (big limb loss fortunately away from the house), we decided to build a pool with sap (we always had a spa) and extend the patio area. After much planning and...

After many years at my home and going thru a fiberglass in-ground and later free standing spa, I am at the end stages of having an in-ground pool and spa. I have an Pentair IntelliCenter installed with Pentair equipment with the exception of an Aquaqal LARGE heater. When seeking info, this blog...