Search results

No kinks in the flexible hose and the wall filter is clean

Yes

My pressure-side sweep (Pentair Legend I believe) stopped working so I have been working through the possible issues. I have cleaned the filter, replaced the wheels to make sure the drive shaft is catching the teeth, cleaned out all the baskets. When I turn the cleaner on it gets good pressure...

I also added Nix for the algae

Thanks for all the responses. Based on what everyone is saying there might not actually be anything wrong with the auto chlorinator. I think what was happening is the algae that is visibly in the pool is eating the small amount that gets put in the pool every day. Now that I have the levels...

I must not have saved. They are there now.

Doh. You are right. I went and got my water tested at the shop and here were the results. Free Chlorine: 0.09 ppm Total Chlorine: 0.09 ppm Combined Chlorine: 0 ppm pH: 7.1 Hardness: 214 ppm Alkalinity: 95 ppm CYA: 19 ppm They had me add a couple pounds of chlorine shock to bring the chlorine...

Thanks. Isn't CYA Cyanuric Acid? I add that regularly to keep the pH balanced.

I have this: Amazon.com : HTH 1273 6-Way Test Kit Swimming Pools Chemical Tester : Garden & Outdoor Just tested: pH: 7.2 Total Alkalinity : 90ppm Free Chlorine: < .5 Total Hardness: ~300ppm CYA: I tried to test, but the solution never got cloudy

I have an auto chlorinator and this summer I have been having algae problems. The pucks don't seem to be dissolving as fast as they used to and when I check the chlorine levels it is always lower than I would like. I have also been adding liquid chlorine periodically to try and boost the...

I added a few more pictures.

I recently moved into a house with a pool that I am managing myself. So far, so good, but I would like to understand a bit more about all the equipment. I want to get a solid grasp on what everything does so I can potentially add features in the future and make sure I am getting everything out...

Thank. I know it will use the highest RPM if cleaner and pool are on. My issue is when just pool is on. I have main pump and a booster pump. I'm not sure if/when the booster ever comes on. I'll try to use the pc app to configure it.

I don't know if I am in service mode. I didn't do it intentionally. The pump says not active.

Yes, the pool button turns green when i turn the pool on, but the pump doesn't turn on. INteresting update: When the cleaner came on with the schedule the pump turned on and it is working as expected. Not sure what will happen tomorrow. I got the windows application running. Here are the...

What program is that and where can find it? I am only using the mobile app. Here are some screen shots. I am turning the pool on by pressing the Pool button on the pool screen.

I have a Pentair Screen Logic controller on my relatively simple setup. Pool, Spa, Jets and Cleaner. I was messing with the IntelliFlo to change the RPMs and I changed the selection for pump at the top and all the settings got cleared out. I tried to put them back the way I remembered, but now...

No screen enclosure, no metal brush, no well. The only thing I can think of is that the lip of our waterfall is metal.

I have a relatively new pool built about 2 years ago. I have been doing all the maintenance myself and it has been going great. In the last month or so I noticed a couple spots that look like rust and since I first saw it there seems to be more appearing. What are they and what can I do to...