Search results

Cleared the cleaner line today using the snake. Filter dropped to about 12 psi which is where it is normally. Now I have two solid skimmers and a working cleaner port that cleans more evenly as it's in the middle of the pool. Thanks for the help. (y)

Used a bladder and a wire snake and finally get the clog cleared. It took a few tries with each method before the main source of the clog cleared. Will be trying same method on the cleaner line today or tomorrow. Ed

Thanks Jim. Yes, both skimmers have working doors. I usually leave the suction cleaner running if there's any noticeable debris on the bottom. If it's clean, I'll pull it out for a day or two. I don't usually have the drain on, I only opened it up after the one skimmer clogged. The cleaner...

Quick backstory: Been in the house almost two years now. Started with pool service but they were so unreliable that I decided to try to do it myself this season. Getting comfortable with the chemistry, but been battling clogged lines recently. My setup has two skimmers at each end plus a...

Yes, I thought of that too when it first started. I turned the pump off, wiped it down and restarted it to make sure. Definitely seeping from that area. That's also the area that was leaking prior to the new seal, but it was literally spraying out in a stream.

Did a search and didn't find anything recent so figured I would try this. My Hayward pump was leaking out of the top at the mounting flange. I got a GoKit and replaced the mounting gasket and it's still leaking (although a little less than before). Any tips on how to get it sealed up so it...