Search results

  1. densvxer

    Replacement Intex Vacuum parts

    When 1st installed my 9x18 rectangle I used a deluxe skimmer with additional intex vacuum accessories... As you can see below the cap that goes on the top of the internal vacuum skimmer component is weathered and broken. I have a filter sock that fits into it for large debris. The top of the...
  2. intex filter accesory top locking cover.jpg

    intex filter accesory top locking cover.jpg

  3. intex filter vauum accessory.jpg

    intex filter vauum accessory.jpg

  4. intex skim filter.jpg

    intex skim filter.jpg

  5. densvxer

    Need help with Intex 9x18 rectangle vacuum accessories

    So I have a 9 x18 rectangle agp and it's original vacuum accessories have become worn out... Seems they are no longer available through intex. The skimmer works fine. But the vacuum accessories are sun bleached and brittle. So the cover is broken and there is suppose to be a seal. Image 1 is...
  6. intex filter accesory top locking cover.jpg

    intex filter accesory top locking cover.jpg

  7. intex filter vauum accessory.jpg

    intex filter vauum accessory.jpg

  8. intex skim filter.jpg

    intex skim filter.jpg

  9. Hayward h100id-Heat Exchanger Inlet2.jpg

    Hayward h100id-Heat Exchanger Inlet2.jpg

    Does not look like much corrosion or lime.
  10. densvxer

    Water Level for above ground pool when closing for winter

    In Littleton, CO have an Intex 9 x 18 last year removed input / output 1.5" pvc pipes, drained 4" below inlet / outlet. Put the heater and sand filter pump into the shed. Then put a Harbor Freight black mesh tarp over it. (12 ft. x 19 ft. 6 in. Mesh All Purpose/Weather Resistant Tarp) It did...
  11. PoolPic 10-2019 Resized.jpg

    PoolPic 10-2019 Resized.jpg

  12. densvxer

    Help Green Pool, Slaming now but after a day @ 20 ppm FC still very green

    I opened up the sand filter and that multiport guard actually stayed in place where it should even though most of the clips were broken.. The sand had a very little amount of debris in it. The sand was pea soup green. When I reached down inside the laterals were only about a 1/2" inch below...
  13. densvxer

    Help Green Pool, Slaming now but after a day @ 20 ppm FC still very green

    Thank you Tex for the link to sand filter deep cleaning....The last time I opened up the sand filter the grill on the bottom of the multiport around the stand pipe would not hold in place and just fall down on to the top of the sand media. Is it needed ? Should I take it out all together or...
  14. Bottom of multiport.jpg

    Bottom of multiport.jpg

  15. densvxer

    Help Green Pool, Slaming now but after a day @ 20 ppm FC still very green

    Help Green Pool Slaming now but after a day @ 20 ppm FC still very green. I have had fairly high cya all summer but through evaporation and backwashes have gotten it down to 50 cya Daily have been keeping the FC around 8 daily adding bleach 64oz daily. Missed a day and took the cover off the...
  16. densvxer

    Another ABG Intex Thermal Pool Cover Reel Designed today Works great!!!

    So today I built a ABG Intex Thermal Pool Cover Reel with 1 1/2" PVC and a small amount of 2". Cost was about $75 and change. The pool is a Intex rectangular 9' x 18" I am happy with how it turned out and actually it reeled up perfectly the 1st time.... I was surprised:D. No rework...
  17. Pool Cover Mount.jpg

    Pool Cover Mount.jpg

  18. Pool Cover Mount2.jpg

    Pool Cover Mount2.jpg

  19. Pool Cover Handle.jpg

    Pool Cover Handle.jpg

  20. Pool Cover EndView.jpg

    Pool Cover EndView.jpg