Search results

Great! Thanks for the info. I'll pull the trigger and see how it goes.

I'm really close to pulling the trigger on a robot for my pool. I've learned over the past year of ownership that the sucky vacuum doesn't do a great job and gets stuck on my suction/return ports on the floor. Meaning I'm in the pool every week manually vacuuming and scrubbing! On top of that it...

James - do you think Leslie pools salinity tests are inaccurate? I can keep taking my water in there to get tested (it's only 2 minutes from my house). I'll also talk to the pool guy that I acquired with the house and ask if he's been checking salinity on top of chlorine levels. Dodger, that's...

Reporting back on this one. I updated the wiring and added in a 4-wire connection from the aquapure backboard to the side pcb. It now shows up via the web and iAqualink 2.0!! However, now I can't control it from the panel buttons. Is it a one way or the other type of situation? Salinity is...

Hey guys, thanks for all the responses! To answer a few questions: I will connect a 4-wire from the aquapure board to the side pcb and test that tomorrow. The tri-sensor was replaced with the cell. The sensor is set to A I will get the CPU number tomorrow morning (when there is light). I have...

So I took another look at the wiring. There is no 4-pin connection going to the backboard that was replaced. The iAqualink 4-pin was installed directly to a side PCB. That side PCB has (4) 4-pin connectors and one of them is directly connected to the Aqualink RS front panel. I'm assuming it's a...

Yeah both cells were 3 prong (pins) on top. I will double check if the board is connected to the 4-wire communication link, but all the cables that were attached all went back on the same way. I'll also switch the spade connectors while I'm in there. I'll post a picture as well. Give me a few...

Hey guys, I've searched everywhere online for answers, but I haven't been able to come up with anything. I bought a house with a pool and everything was fine until the Aquapure 1400 fried itself (internal leak was causing water to push up into the prongs). I had it replaced under home warranty...