Search results

Mine gets stuck on bottom drain but working well otherwise. Here’s a decent price offer. Time limited 48 Hours

Attachment came over the weekend. Easy fix to unit. LOVE my cordless Robot!

I have contacted support 3 times because of floor drain snag. Got email yesterday modification item has shipped. Unit cleans pool well when not snagged on drain.

I got delivery of cordless seagull 1500. It charged right up and ran for 90 minutes got stuck once on a floor drain so I have contacted customer support for the modification kit. My pool is 18000 gal so that’s likely the upper end for this unit. Scrubbed walls and water line picked up things...

Thanks that’s what I did just do not know the jargon. Thanks for helping me! There’s a link to a cheap automated solution 'Low Budget DIY Automation' Low Budget DIY Automation Thanks to all

Just found this thread THANK YOU!

I converted my single speed whisperflo to Variable speed and love how quiet the new pump is. The pump now controls the timing of operation so I set Intermatic time to operate 24/7. This inadvertently left the salt cell (aqua rite) controller on 24/7. Researched here how to add a relay to...

Once I cleaned the cell the controller registers the salt level accurately. Thank you all for setting me on right path. The low salt reading shutting down the cell chlorine generation

Thanks for the clarification. My salt cell controller thinks I have low salt even though test kit says I’m at 3200. I think that’s creating my low chlorine condition. Will inspect clean cell to see if controller corrects.

Installed the new pump for this season. Old pump was a single speed whisper flow. My pool has a salt cell. I’m filtering for the same number of hours as however at a lower speed. So I’m noticing my chlorine is dropping quickly. I’m assuming that’s because lower speed means less water...

I did get my replacement unit and also free return shipping. I love the concept of this product just not keen on their communication and processes. I inquired about the motor failure issue (in general) but was not given a response. I think they are a small company trying to handle a...

I know of one other unit bought at the same time with a rear frozen motor. The motor problem seems like an inferior and faulty part. Would love it if company communicated how this repetitive problem is rectified. Working with claims is frustrating . All by email and the only phone number I...

Yes I know of one other unit bought at the same time with a rear frozen motor. The motor problem seems like an inferior and faulty part. Would love it if company communicated how this repetitive problem is rectified. Working with claims is frustrating . All by email and the only phone number...

Had mine for 6 months. One motor froze and unit started turning tight circles. Make warranty claim on website. Include serial number (under tray) and your shipping info. Reference date ordered. They have responded they will ship a replacement unit and email return shipping label so they can...

You make warranty claim on line Solar Breeze website. I checked again 7 days later and they forwarded a response which had not made it thru to my email. ZERO PHONE SUPPORT. Send serial number (under tray) and shipping info in your initial request. They indicate they will send new unit and...

After 6 months of use rear paddle has frozen. I emailed customer service will report back on process. Acquired Ariel Sept 2021

I’m want one can you share the discount with me?

I'm also in the market for a new pump, I have a 1.5 HP single speed whisperflow and salt cell pool, with a booster pump for the 280 cleaner. 18,000 gallons. The catchment has its own single speed pump that I could harvest parts off of my retired main pump to keep it going for a while...

I feel like thermal protection is triggered it will not immediately restart when I toggle the switch. After the motor cools the Polaris will run again. I took the cleaner apart and did not find any restrictions or bad parts. The pump motor sounds normal. I do not see any signs of leaks...

I got my board working again but my instant salt stayed at zero. All other settings looked normal. I independently tested salt level at 2800 which matched factory board set on the new board but instant salt remained at zero. If you encounter this do the following: 1-Turn the percentage to...

YUP this time I was able to speak to someone in Hayward customer support and the model number was correct but they indicated the unit firmware was flashed for aquatrol. Got the new unit installed and I am back in biz. There was nothing unusual about the wiring and the spec sheet shows 092412A...

I replaced the board and it is remaining on AL-7 which means I am not generating or registering the flow switch. I try to change it and nothing moves. The wiring was nothing different than what was already there.

Thank you James. I will look more closely at the new board insert it says their is a change to how the rectifiers are wired. I am over my head a bit!

The 20 amp is good. The board has instructions for a change in wiring, do you know anything about it? Also should the AL be set at 1? I wish I knew which manual I should be looking at. Thats what sucks with Hayward stopping support. I don't see a manual for a Model AQ-Rite. Attached is the...

Thanks James. The power light does not come on and on start up after the flow switch engages, it goes to generating for about 3 seconds then off, salt readings remain at 0.0. From watching the video this is exactly the sequence when the Thermistor is out the diagnostic readings are 0 84 0.0...

#1 I have an Aquarite Goldline Chlorine generator, when I go to find the parts and documents Hayward requests a model number. It starts out AQR with some additional digits. Does anyone know how to determine which model I have? I called Hayward and they have gotten rid of technical support sent...

Makes sense Woody! THANKS