Search results

Okay the pool is 29000 gallons plaster in ground with a sand filter. PH 7.0 Chlorine 0 ALK 90 CH 200 CYA 35 Should I start by raising PH and then move to SLAM? Thanks Guys

This was my suspicion also.

No, it's not covered

Hi Guys, I have a 12500 gallon OGP with sand filter. Outdoor temp has been about high 80's to low 90's. These are my readings: CH 10.8 PH 7.4 CH 270 ALK 80 CYA 60-65 The pool is not using hardly any chlorine. My reading 4 days ago was CH 12. I was using trichlor pucks and stopped about a week...

So, according to those levels all I need to add is chlorine.

Readings are FC .2 PH 7.2 TA 50 CH 50 CYA 35 What targets should I use in the pool math calculator for adding chemicals? When adding calcium chloride, can I use Peladow calcium chloride? Thanks in advance.

Pool is crystal clear. fc 14 CC .8 I just added more chlorine to bring it up to 16.

pic of pool from stairs

After slamming yesterday FC 15.2 CC 1.2 that was at 8:45 PM last night. Today at 9:40 AM FC 12.6 CC .2 Poll is clear but with the FC drop should I continue to slam?

Okay, I have got new readings and think I'm ready to SLAM the pool. 7.2 PH 7 FC .6 cc 60 TA 300 CH 35 CYA

Yup, I have one sock in front of skimmer and other in front of jet. I'm guessing 2-3 days for the stabilizer to dissolve. how much clorox should I add?

The stabilizer is in socks. pool is 11700 gallons

Numb, thanks for all your help. I just added 55 oz by weight stabilizer. Should I also add clorox nightly now?

The pool is not green at all. It is just a little cloudy.

Any advice on what to do next?

So, this test is a little tough to get use to. I made a mistake and multiplied by 100 and not 10. That said, my initial reading was 230. after adding my nightly clorox i tested again and I now have a CH of 330. Sorry for the confusion guys.

Thanks for trying to help.

purple again

I tested I will do a 10 ML sample now. Stand BY.....

So, purple color is okay to start with?

25 ML test I add 20 drops of R 0010 swirl then add 5 drops of r 0011L and the color goes purple. per the instructions I have it calls for adding 5-6 drops of the hardness reagent to the test water and then test as normal. When I do this first the test remains blue.

Just retested ch and I had a false reading the correct reading is 0

Just tested new pool water. What next? Hello, I got my taylor kit in today and here are my readings. PH 7.0 CH 0 TA 100 FC .2 CYA 0

Agreed, the test strips came with the new pool package. I have had two pools in the past and used the taylor kit for my other pools. Should I by Clorox or the generic bleach?

Hi Guys, The pool was installed last October. I took the cover off last week and a lot of the debris/leaves went into the pool. The pool water was a dark green color last week and now is a blue/grey color. Most of the leaves/debris is out of the pool now. I have ordered the taylor k-2006 and...