Search results

Thank you very much for the advice. I'm glad the pavers are only on one side of the pool and glad they are pavers and can be removed fairly easily.

So, I should remove the stone dust, cut the pavers to allow a 1/4" to 3/8" gap from the coping and fill the gap with a flexible sealant that is not silicone based?

Does the soil beneath the pavers need to clear also?

BTW, my pre-cast coping is very similar to what you show in the diagram. The pavers are the deck.

The distance varies from zero to a half inch. The pavers are a couple of inches thick so the dirt is against the bond beam. The stone dust hardens like mortar and the pavers have a slight hump like they are starting to buckle. Should the expansion joint be completely free all the way down to the...

My pool has pre-cast coping with pavers next to it and stone dust between. Is this a good expansion joint?

Thanks again for your help. I will take a picture, but I have a different issue right now. After testing the water I was told to add 2 lbs. of PH up. The pool got very cloudy and I cleaned a pasty white substance off the cartridge filter a couple of days after and, now, after about 6 days, it...

Opening is not that small. 1" PVC. Eyeball jet maybe 1/2".

I did that and didn't find anything inside. It seems odd that it's the third jet of four. I know a little about plumbing. Would they just "tee" from jet to jet? If so, how would it clog?

Thanks for the response. All equipment is about a year old. I did what you suggested and that one jet just trickled water. Any way to unclog?

I have an in ground 25,000 gal pool and spa, built in the 80's, recently remodeled (plaster and tile). Lately the spa jets are not blowing out bubbles. There are 4 jets and one is sucking water. I hooked a shop vac to the vent and blew air through and all jets showed bubbles. What would make one...